1. The color is the same as the grade.
The color of the sanitary ware facial wash, toilet, bathtub or bidet should be the same, and the grade of the sanitary ware should be coordinated with the color of the bathroom floor tiles and wall tiles. Generally, the color of the sanitary ware in the bathroom is similar to or slightly shallower than that of the floor tiles. The three-way faucet of the basin faucet and the bathtub should be selected with the same brand and the same style is more harmonious. The faucet is best to choose a single-handle ceramic core, because the nozzle of the ceramic valve core is more durable than the rubber core and does not leak water.
2. Be consistent with the drain.
Before selecting the toilet, it is necessary to clarify whether the toilet reserved water outlet is under drainage or horizontal drainage. If it is under drainage, the distance from the center of the outlet to the wall must be measured, and then the toilet with the same distance should be selected. Otherwise, the toilet cannot be installed; if the drainage is horizontal, the height of the outlet to the ground, the toilet outlet and reserved drainage should be ascertained. The mouth height should be the same or slightly higher to ensure smooth drainage.
3. Water-saving function check.
When choosing a water saving type toilet, there is often a misunderstanding that the smaller the water tank is, the more water is conserved, and the smaller the water tank is, the less the size of the water tank is. In fact, whether or not the toilet water saving does not depend entirely on the size of the water tank. It is mainly due to the design of toilet flushing and drainage systems and water tank accessories. Some toilet tanks are small, but the flushing performance is poor. One flush is not clean. It takes two or three times to flush. Some toilet tanks are not small, but the tank water line is very low, flushing water is very good, the same water-saving. Therefore, whether the toilet water-saving, can not just look at the size of the water tank, can not only listen to dealers, dealers should be requested from the national technical supervision agency's product testing report marked by the amount of toilet flush. The 6 liters of water used in China are water-saving toilets. The 4. 5 litre water-saving toilets produced by Ying Tao are currently the most water-saving domestic ones.
4. How to distinguish the quality of sanitary ware ceramics.
The general high-quality sanitary ware is glazed and clean, and there are no phenomena such as lumps, chromatic aberration, pinholes, and lack of glaze. The sound produced by striking a ceramic with a hard object is crisp.
Inferior products generally have more pinholes, bumps, cracks, and lack of glaze on the glazed surface. There is a slight deformation of the appearance (the surface of the basin is not buckled on the countertop, and the toilet bowl is shaken on the ground, etc.). The trademark is not blurred. The sound produced by Qing and percussion was boring and there was no crisp sound.
Tile bathtub bathroom design bathroom wall tiles bathroom floor tiles bathroom leak
Aluminium Cell Steel Bar Graphite Paste
Pingluo Zhongxing Carbon Co.,Ltd , http://www.ztecarbon.com