What we are talking about today is the laying process of laminate flooring. First of all, what is a composite floor? Composite wood flooring is crushed in the wood, add plastic, preservatives, additives, heat press high temperature and high pressure processing, so it broke the physical structure of the log, to overcome the poor stability of the log. Composite flooring has high strength, uniform specifications, high wear-resistance coefficient, anti-corrosion, anti-mite, and good decorative effect. It overcomes problems such as knots, insect eyes, and color differences on the surface of logs.
Here we will talk about the main installation sequence of composite wood flooring:
The first step, of course, was to clean up the construction site and clean up the garbage on the ground. Including each corner, the ground was not clean, and there was a feeling of “sandwich†under the floor.
Then the ground leveling, the horizontal error can not exceed 2mm, more than if you want to find ways to level. If the ground is uneven, the floor feels bad after the floor is laid. Then, we must trim the edges and corners of the ground or uneven parts of the ground.
After the floor is cleaned, the moisture-proof layer is laid so that the floor can be protected from dampness. The damp-proof layer should be laid flat and joints should be close together.
The following work is officially started to install the floor, because the floor is to be installed in a scattered manner, we must first pre-shop it, part of the floor is divided into two, according to the size of the saw, in case more than saw, the floor loss will be large.
Before sawing the floor, the floor can be fully opened and the problematic or sloppy floorboards can be singled out. This can effectively use the partially faulty floor without causing excessive loss. Don't take the floor and saw it, it will increase the loss.
The location of sawing the floor must be selected in the place where the tiles and other tiles are well-organized. Otherwise, the splattered wood dust will enter everywhere without any holes and it will be difficult to clean.
Because the floor has a certain expansion rate, it is necessary to reserve expansion joints in the places where it touches the wall before paving, so as to prevent the floor from kicking. The size of the expansion joint is generally related to the coefficient of expansion of the floor.
Bonding the glue on the floor should be special for the laminate flooring. The glue pollution is relatively small. Do not choose non-floor special glue in the market. It will increase the pollution source on the floor itself. Before you shop, you can see if the glue is right.
The next step is to lay the floor. When laying, it is necessary to store a short piece of wood beside the long one, so that the cross-laid floor will not be easy to bite, and the floor will be tightened with tools.
Then down is the convergence, generally covered with floor beading. But it's also filled with glass glue to see what you like.
After the above work is done, check it again, if there is an imperfect place to trim it. Then enter the last process. It is the installation of the baseboard. The joint to be done is tight and flush. And to ensure that you can suppress the floor wall joints.
The floor is paved next is the installation of a layering, the general floor is higher than the ground to use that kind of high and low pressure, the floor is the same as the ground level to use this flat layering.
Flooring Glass Decorative Flooring Tiles Glass Tiles Tile Floor Tiles Balcony Tiles Tiles Specifications
Roller window screening sash cord, Unlike conventional fixed screens, roller window screens won`t get in the way of your view - they retract out-of-sight when not in use.
Giving you protection from insects, shade from the sun and privacy, they`re discreet and will match with your home`s design.
window screen DIY installation. Ideal for any hinged window, DIY installing, and Automatic closure.
Aluminum Fixed Screen Window And Door
Aluminum Fixed Screen Window,Aluminum Fixed Screen Door,Aluminum Hinged Insect Screen Door
Hebei Charlotte Enterprise Co., Ltd. , http://www.cnscreening.com