Accessories:
The design of the accessories must first consider the available space inside the wardrobe, avoiding the lack of space in the wardrobe, and designing too many accessories. On the one hand, the internal space of the wardrobe will be wasted, and the storage effect will not be achieved. On the other hand, it may lead to some The accessory is not working properly.
colour:
The choice of the color of the wardrobe must be in harmony with the overall decoration of the home. If the home is dominated by warm colors, the color of the wardrobe cannot be chosen as a cool-looking style. The wardrobe should be a beautiful view of the home. It is recommended that you choose a natural atmosphere. A thicker color appearance to match the style of the home.
Reasonable partition:
Although each family's clothing is old and young, large and small, but if the space is designed properly, it is convenient to find clothes and save time. There won't be a situation where you have to find a piece of clothing to rummage through the closet, or if a piece of your favorite clothes is lying in a corner for a long time.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelights.com