Decoration disputes are generally between the decoration of the family and the decoration of the construction unit, the decoration of the family and the surrounding residents because of the decoration in violation of the decoration contract, the provisions of the occurrence, mainly in the following areas:
1. The decoration unit did not completely fulfill the decoration contract.
The incomplete performance of the contract is mainly manifested in the following: the decoration unit did not go to the decoration according to the contractual stipulations, used the non-contractual decoration materials, stopped for no reason in the construction, and did not complete the work within the agreed construction period.
2. The decoration was rough and the construction quality was poor.
Some decoration company construction workers do not work hard, the process is not standardized. On the surface, it is plausible, but when it fails to pass the inspection or the test of time, there is still a problem with it. In particular, the "street guerrillas" have no guarantee of quality.
3, after the renovation of repair services are not perfect or do not fulfill the quality commitment.
After the renovation, it should be repaired in time according to the contract, but some companies are evasive. There is no warranty within the warranty period.
4. The noise in construction affects people.
Noise will inevitably occur during construction, but the owner must make an appointment with the decoration company in advance to start construction and time. Do not violate the relevant provisions of environmental protection, otherwise it is easy to cause disputes.
5, decoration materials or waste indiscriminately placed.
6. The decoration damaged the adjacent house.
7. The decoration damaged the main structure of the house and the load-bearing structure.
For the decoration disputes, relevant departments have formulated some regulations. Such as "The Consumer Protection Law of the People's Republic of China", "Law of the People's Republic of China on the Prevention and Control of Environmental Pollution" and the Ministry of Construction [1997] No. 60 "Interim Provisions on the Handling of Construction Project Quality Complaints", Ministry of Construction [1997] No. 92 "Home Living Room" "Decoration and Decoration Management Trial Measures" and other regulations.
The "Building Decoration Management Regulations" pointed out that homeowners or house users should be responsible for repair or compensation for damage to adjacent houses due to decoration.
Article 15 of the Trial Measures for the Management of Decoration for Family Homes stipulates that disputes concerning the decoration and decoration of family homes may occur. The complaints may be filed with the local construction administrative department or its designated organization, or civil litigation may be filed with the local people’s court. Article stipulates that if the decoration of the family due to the family room decoration caused by neighboring residential housing pipeline plug, leakage of water, power outages, damage to goods, etc., should be repaired and refurbished by the family room residents responsible for repairs and compensation, if it is a decoration construction unit The responsibility of the homeowner is to find the decoration unit responsible for the repair and compensation.
According to Article 43 of the "People's Rights Protection Law of the People's Republic of China," when consumers and managers have disputes over consumer rights, they can solve the following problems:
1. Negotiate with the operator
2, consumers request consumer association mediation
3, appeal to the relevant administrative department
4. According to the arbitration agreement reached with the operator, the arbitration agency is invited to arbitrate
5. File a lawsuit with the People's Court.
However, it must be noted that under normal circumstances, if arbitration is referred to, no action may be brought before the court.
According to the "General Principles of Civil Law", "Economic Contract Law" and other involved laws, there are no more than a few disputes related to the settlement of decoration:
1, the parties to negotiate
2. Competent administrative mediation
3. Arbitration settlement
4, litigation solution.
In addition, industry regulations provide many ways to resolve disputes. As some home furnishing market regulations stipulate, resolution of disputes follows the following process:
Complaints - accepted by the mediation department - the quality inspection department conducts on-site verification according to the contract and drawings - the mediation department and the quality inspection department conduct mediation according to the verification result - if the parties reach an agreement, repairs or rework will fail if no agreement is reached or the agreement is not fulfilled. Apply for arbitration or sue in court.
For consumers, before the renovation may wish to inform neighbors, say hello, so that everyone has a psychological preparation to reduce the probability of disputes.
In the event of a dispute, as long as the parties negotiate calmly and assume the responsibility for the responsibility, the dispute can be resolved. If they fail to negotiate themselves, they will generally be able to solve the problem as long as the administrative department comes forward. However, if the subject matter involved is large or other disputes that have a great impact on life are not negotiated, the most formal, most authoritative and effective method can only be a lawsuit. Of course, other residents’ disputes with the decoration of the family due to the construction of the home can also be resolved accordingly.
Entrance decoration restaurant decoration home decoration decoration house decoration company home improvement decoration company
Previous What is the entrance?
Next New house decoration acceptance experience
Decoration disputes are generally between the decoration of the family and the decoration of the construction unit, between the decoration of the family and the surrounding residents because of the decoration in violation of the decoration contract, the provisions of the occurrence, mainly in the following areas
Decoration disputes generally occur between the decoration of home and decoration construction units, between the decoration of the family and the surrounding residents and decoration in violation of the relevant renovation contract and regulations, mainly in the following aspects: 1, did not fully perform the decoration contract. The main performance of the incomplete performance of the contract is as follows:
How to deal with decoration contract disputes 1. The process of resolving decoration disputes to resolve disputes is as follows: Complaints - accepted by the mediation department - QC department conducts on-site verification according to contracts and drawings - the Ministry of Cont Mediation - repair or rework if the parties reach an agreement; if no agreement is reached or agreement is not fulfilled, apply for arbitration or bring a lawsuit to the court. 2. Laws and regulations to solve the decoration dispute
How to deal with decoration contract disputes 1. The process of resolving decoration disputes to resolve disputes is as follows: Complaints - accepted by the mediation department - QC department conducts on-site verification according to contracts and drawings - the Ministry of Cont Mediation - repair or rework if the parties reach an agreement; if no agreement is reached or agreement is not fulfilled, apply for arbitration or bring a lawsuit to the court. 2. Laws and regulations to solve the decoration disputes
We all know that decoration and decoration contract disputes often appear in the decoration. Although we may not be able to meet this kind of present, understanding the decoration and decoration contract dispute resolution method in advance will help us to prepare for the rainy day. Look at the decoration and decoration contract dispute resolution method for your reference.
submit
Cylindrical Roller Bearings are bearing in which cylinders are used as the rolling elements as opposed to balls in ball bearings. As such, the rollers have a greater (linear) contact area with the outer ring and are distribute loads across a broader surface. Subsequently, they have a relatively high radial load capacity and are suitable for high speeds. Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.
Cylindrical Roller Bearings are designed to carry heavy radial loads. Our cylindrical roller bearings are made with a single row, two rows, or multi-rows of rolling elements to meet an application's radial load requirement. The radial Roller Bearing is available in many standard series and configurations, they are widely used in multiple industries. The combination of high load capacity, moderate speed rating, and industry interchangeability make it one of the most popular bearing designs. These cylindrical roller bearings are produced in ISO series metric, ABMA series metric and inch, journal type, Full Complement series, multi-row series, and cluster mill sizes. These bearings are dimensionally interchangeable to same numbered and sized bearings in the industry. Components of journal bearings and other standard series are made interchangeable with other manufacturer's components. Many mounting arrangements can be achieved with the multiple configurations available with the same load capacity for a given I.D., O.D., and width. Our cylindrical roller bearings can be manufactured in sizes from 3" bore diameter to 84" outside diameter. Internal radial clearances and cage designs can be engineered to your specific application when special applications are encountered.
Cylindrical Roller Bearing,Cylindrical Spherical Roller Bearing,Conveyor Cylindrical Bearing,Cylindrical Roller Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com