How to protect the stainless steel door and make it look new!

Stainless steel doors are also commonly used at home, but how to maintain the stainless steel door and make it last longer is not known to most families. Today, Xiao Bian introduced how to maintain the stainless steel door.
1. In the ordinary course of use, the door should be opened and closed slowly, so that the damage of the stainless steel door protection layer caused by collision with other sharp and sharp objects can be avoided.
2. When using the stainless steel door in a relatively humid environment for maintenance, pay attention to the condition of the stainless steel door caused by oxides and microorganisms. Because of the dust in this environment, it is filled with acid gases.
3, stainless steel door surface dirt can be used for soap, detergent or warm water rinse, can not use detergent containing chemical components, avoid the use of bleach and so on. The trademark and film on the surface of stainless steel are washed with warm water and weak detergent.
4, some families will use stainless steel doors in the kitchen. The stainless steel door in the kitchen is very easy to be stained by fumes, and the fume is a kind of dirt that is more difficult to manage, but as long as you find a suitable solution, you can still do more with less. How can the oil be quickly removed without damaging the stainless steel door? Wipe it with a soft, clean cloth and then clean it with a neutral detergent or a special detergent. Finally wipe the stain with a wet towel and wash it again with water.
5, stainless steel surface with bleach and various acids attached to, immediately rinse with water, and then dipping ammonia solution or neutral carbonated soda, washed with neutral detergent or warm water.
6、Stainless steel door surface has rainbow pattern, which is caused by excessive use of detergent or oil. When washing, it can be washed away with warm water detergent. Stainless steel rust can be used with 10% nitric acid or grinding detergent. It can also use special cleaning stainless steel. Shuangfei powder, rust-proof cream to clean stainless steel door!

T300 Joint Wrap Tape tape series is designed for corrosion protection of straight pipes, fittings, flanges valves,

bends, elbows, carbon steel pipes and other irregular configurations.
Joint wrap tape be made of a stabilized PVC carrier film, coated on one sides with a permanently plastic
synthetic compound on Butyl rubber compound bitumen base.



Description

Pipe Wrap Tape is used as the base material which is coated by the liquid butyl rubber film, both of which are pressed and compounded. Pipe coating tape will protect the pipe and its anti-corrosion tape surface from pipeline damages. Xunda high quality pipe wrap tape coating tapes have been specially developed for high-quality, corrosion protection for joints, in cases where the pipeline has already been installed. The material is easy, safe and quick to apply on welded joints, bends and other complicated shapes.

Usage

l Provides long-term anticorrosion to steel pipelines.

l Repair of damaged factory applied corrosion protection and anticorrosion to pipe surface

l Outlining weld beads and cut backs prior to wrapping bare-welded joints.

l Outlining seams on spiral and seam welded pipe.

Features & Benefits

l Excellent adhesion to a wide range of industries, steel piping.

l Effortlessly applied with no special equipment (mouldable by hand).

l Compatible with common pipe coatings

l Endures extremes of heat and cold.

l Excellent resistance to cathodic disbondment.

l High water and vapour impermeability.

l Complies with ISO,DIN30672,AWWAC214 209,ASTMD1000.EN12068

Main market

· Iran,UAE,Iraq,Kuwait,Turkey,Egypt,Libya,Ukraine,Russia,Bengal,Pakistan,

· Uzbekistan,India,Australia,Indonesia,Kazakhstan,

· Ecuador,Venezuela,Bolivia,Argentina,

· Uruguay,Malaysia and so on.

Material:

Polyethylene backing

Butyl rubber adhesive

Payment:

T/T , L/C,Western Union,Money Gram,Cash

MOQ:

500 roll

Shipment port

Qingdao or Shanghai port

Package:

12 rolls,6 rolls,4 rolls

Sample leading time:

about 5 days in the free season,may be 8 days in the busy season.

Delivery time:

10 days after the order confirmed,and it depends on the quantity of the order.

Brands:

OEM or ODM, we can provide as your requirements,

including your design/size/material/weight/Logo/package and so on.

Ordering Information

Tape Coatings are available in roll form.Ordering

Example: T100-20 WHT6X100FT 3``

20




Tape thickness

20 mils (0.508 mm),25 mils (0.635 mm)

WHT

Tape color

Black (BLK), White (WHI), Blue (BLU),GREEN(GRN)

6

Tape width

1" (25 mm), 2" (50 mm), 4" (101 mm), 6"(152 mm),

200FT

Tape roll length

100 ft (30 m) 200FT(60m),400FT(120m),600FT(180m)

3

Tape core diameter

1.5" (38 mm), 3" (75 mm)


112




pipeline Joint Tape

Self Adhesive Tape, Joint Coating Tape, Welding Wrapping Tape, Field Joint Tape

Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com