Plant or garage floor sanding ash / Z2 concrete ground efficient hardening agent Zhengxiang Z2 concrete hardener
product description:
Zhengxiang Z2 concrete hardener is specially developed to solve the problems of concrete floor, wall ash, sanding and insufficient strength. It is a new type of water-based organic composite material with unique formula. It can effectively penetrate 3-10mm of concrete surface and form a series of complex chemical reactions with free matter in concrete to form a three-dimensional network of dense whole, which greatly improves The surface strength of concrete reaches the hardened ground, the effect of sand control and ashing is controlled, and it is durable and effective. The service life is the same as that of concrete, and the construction is simple. It only needs to be painted on the concrete surface.
First, the main function of concrete hardener
1. Fast hardening, dustproof on the ground, high wear resistance;
2. Improve the compressive strength and impact resistance of concrete surface;
3. Improve chemical resistance;
4. Significantly slow down carbonization;
Second, the scope of application of concrete hardener
1. New and old concrete floors and cement mortar floors that are easy to ash and sand;
2. Newly constructed raw pulp calendered concrete floor;
3. The indoor and exterior wall plastering layer is sanded and dropped;
4. The strength level of the concrete structure is not enough, the strength and hardness are increased, and the rebound value is increased by 10%-25% (about 2-10 rebound values);
5. Improve the ground wear resistance of garages and workshops
Third, concrete hardener construction method
1. For sanding of cement and concrete floors, first clean the dust on the ground thoroughly, and try not to leave ash. If you want to use water for scouring, you must build it every other day and make sure there is no clear water or Wet; use one-side pouring method to spread the material evenly, so that the Z2 material can fully penetrate into the ground; in 30 minutes, the material with the seepage phenomenon can be replenished at any time, and the accumulated material is evenly scanned; The amount of the ground is directly related to the degree of looseness of the ground. The condition of the base determines the absorption of the material (unit dosage), and the general ground can be brushed 2-3 times to achieve the best results.
2. For the sanding of the plastering wall, use the roller or brush to directly apply the Z2 material to the sanding base. The number of paintings is determined by the severity of sanding on the site. Generally, the sanding brush can be used once, and the sanding is serious. Or brush the important parts twice.
3. In order to improve the rebound value of concrete, brush the Z2 material on the surface of the structure by roller coating, and repeat the painting repeatedly, with a single interval of 10-30 minutes to maintain the saturated wet state, so that the material fully infiltrates the interior of the concrete structure; In the following 2 days, the Z2 material is continuously applied according to the above method, and the structural strength is continuously increased.
Fourth, the consideration of concrete hardener
1. Construction temperature: 0°C-45°C
2. Plastic barrel seal, stored above 0 °C, shelf life 12 months
3. Check whether the packaging is complete and sealed during transportation.
4. If you accidentally take it, please drink plenty of warm water to induce vomiting and seek medical attention. Skin contact or splash into the eyes, rinse immediately with water or seek medical attention. Avoid contact with children.
Typical Case:
Tianjin Wuqing 220,000 square meters wall sanding
Sanding in the wall of Tianjin Jinghai Ziya Demonstration Town
60,000 square meters of sand surface in Shandong Zibo
Tianjin Hanjiashu 100,000 flat wall sanding
40,000 flat wall surface sanding in Zhangjiagang, Jiangsu
A concrete mixing station in Sichuan improves the concrete strength by 10 tons
Tianjin Hanyu a mixing station to increase the concrete strength of 5 tons
10,000 flat ground aging sanding in a factory in Tianjin Beichen Development Zone
30,000 flat ground sanding in a factory building in Tianjin Wuqing Development Zone
and many more...
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
product description:
Zhengxiang Z2 concrete hardener is specially developed to solve the problems of concrete floor, wall ash, sanding and insufficient strength. It is a new type of water-based organic composite material with unique formula. It can effectively penetrate 3-10mm of concrete surface and form a series of complex chemical reactions with free matter in concrete to form a three-dimensional network of dense whole, which greatly improves The surface strength of concrete reaches the hardened ground, the effect of sand control and ashing is controlled, and it is durable and effective. The service life is the same as that of concrete, and the construction is simple. It only needs to be painted on the concrete surface.
First, the main function of concrete hardener
1. Fast hardening, dustproof on the ground, high wear resistance;
2. Improve the compressive strength and impact resistance of concrete surface;
3. Improve chemical resistance;
4. Significantly slow down carbonization;
Second, the scope of application of concrete hardener
1. New and old concrete floors and cement mortar floors that are easy to ash and sand;
2. Newly constructed raw pulp calendered concrete floor;
3. The indoor and exterior wall plastering layer is sanded and dropped;
4. The strength level of the concrete structure is not enough, the strength and hardness are increased, and the rebound value is increased by 10%-25% (about 2-10 rebound values);
5. Improve the ground wear resistance of garages and workshops
Third, concrete hardener construction method
1. For sanding of cement and concrete floors, first clean the dust on the ground thoroughly, and try not to leave ash. If you want to use water for scouring, you must build it every other day and make sure there is no clear water or Wet; use one-side pouring method to spread the material evenly, so that the Z2 material can fully penetrate into the ground; in 30 minutes, the material with the seepage phenomenon can be replenished at any time, and the accumulated material is evenly scanned; The amount of the ground is directly related to the degree of looseness of the ground. The condition of the base determines the absorption of the material (unit dosage), and the general ground can be brushed 2-3 times to achieve the best results.
2. For the sanding of the plastering wall, use the roller or brush to directly apply the Z2 material to the sanding base. The number of paintings is determined by the severity of sanding on the site. Generally, the sanding brush can be used once, and the sanding is serious. Or brush the important parts twice.
3. In order to improve the rebound value of concrete, brush the Z2 material on the surface of the structure by roller coating, and repeat the painting repeatedly, with a single interval of 10-30 minutes to maintain the saturated wet state, so that the material fully infiltrates the interior of the concrete structure; In the following 2 days, the Z2 material is continuously applied according to the above method, and the structural strength is continuously increased.
Fourth, the consideration of concrete hardener
1. Construction temperature: 0°C-45°C
2. Plastic barrel seal, stored above 0 °C, shelf life 12 months
3. Check whether the packaging is complete and sealed during transportation.
4. If you accidentally take it, please drink plenty of warm water to induce vomiting and seek medical attention. Skin contact or splash into the eyes, rinse immediately with water or seek medical attention. Avoid contact with children.
Typical Case:
Tianjin Wuqing 220,000 square meters wall sanding
Sanding in the wall of Tianjin Jinghai Ziya Demonstration Town
60,000 square meters of sand surface in Shandong Zibo
Tianjin Hanjiashu 100,000 flat wall sanding
40,000 flat wall surface sanding in Zhangjiagang, Jiangsu
A concrete mixing station in Sichuan improves the concrete strength by 10 tons
Tianjin Hanyu a mixing station to increase the concrete strength of 5 tons
10,000 flat ground aging sanding in a factory in Tianjin Beichen Development Zone
30,000 flat ground sanding in a factory building in Tianjin Wuqing Development Zone
and many more...
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Plastic Grilles,Plastic Return Air Grille,Plastic Air Vent Grilles,Plastic Ventilation Grilles
Guangzhou Jointair Co., Ltd. , https://www.jointair.cn