The gold-rolling machine is a beneficiation equipment similar to a ball mill. It is mainly used for gold, silver, lead, zinc, iron, molybdenum, copper, niobium and other minerals. All ball mills can be selected for mining, and wet mills can be used. The gold crusher is a complex mechanical device, so installation and operation require a certain amount of knowledge. Xinxin Heavy Industry Co., Ltd. is a professional manufacturer of gold-rolling machine. With years of research and development and manufacturing experience, it has summed up some knowledge about the gold-rolling machine. Today, we are here to explain the installation process and gold selection of the gold-rolling machine. method:
Installation of the rolling mill:
The first step: use concrete to make a four-meter square foundation, leveling. Then use the 10*17 square wood to place on the ground level.
Step 2: Place the gold-plated rack on the square wood, and hang the water basin on the machine of the gold-rolling machine and fix it with Screws.
The third step: put a large sand of about four centimeters thick in the basin, and level it. Then put the plate (the bottom of the mill, also called the runway) into the sand on the basin. Must be placed in the center of the basin, both in the center of the basin. Prevent the smashing from running off the job.
Step 4: Put the two cores into the middle of the mill, fix them with a flange, and then fill the gap between the rolled ring and the core with 2.5 cm thick solid wood (the top is inclined) to prevent rolling. Delivered during operation. Then, the two installed rams are correspondingly hoisted in the groove of the bottom of the shovel, and the short straight bar is placed on the middle large shaft of the rolling machine, connected with the ram core, and then the long skein is inserted into the groove. At the top of the large shaft, hook the hook into the hole at both ends of the pull bar, and connect the bottom to the core. Convenient and fast.
The gold deposit method of the gold machine:
The first step: After the installation and commissioning, the gold-rolling machine will add about one kilogram of mercury to the bottom of the rolling mill (also called the grinding plate) to start normal work.
The second step: collect the sands in each class, add five kilograms of mercury to the bottom of the sand and mercury in the shift, put the mercury into the gold equipment, and use the red cloth with higher density to force the mercury out. Then after opening the red cloth, the rest of it is the sand.
Step 3: Add one kilogram of mercury to each shift. There is a kind of gold that can be collected by using a gold cloth or a gold blanket and then putting a mercury board on it.
Concerned about surprises
Label: Installation method of gold crusher and method of gold selection
Previous: Instrument error is inevitable Next: Energy saving technology and characteristics of gear pump in the future
Hexagon nuts (also known as finished hexagon nuts) are available in ASTM A563-A and are compatible with mild steel Bolts, such as ASTM A307, ASTM F1554 Grade 36, SAE Grade 2 and AASHTO M183. SAE Grade 5 and Grade 8 nuts are also available in finished style. Since hot-dip galvanizing usually increases the thickness of the threaded part of the fastener by 2.2 to 5 mils, the thread size of the galvanized hexagon nut is too large to compensate for the anti-corrosion coating on the bolt.
Chinese hex nut manufacturer Hongchuang Hardware provides hex nuts of various materials, such as carbon steel, stainless steel, alloy steel, titanium, etc.
Carbon Steel Nut,Galvanized Nut,Carbon Nuts,Carbon Steel Hex Nut
Taizhou Hongchuang Hardware Co., Ltd. , https://www.taizhouhongchuang.com