Waterproof decoration can not cut corners
To do a good job of waterproofing the bathroom can greatly alleviate the problem of flooding, especially in poorly ventilated bathrooms. Waterproofing should be done during the renovation. Try to choose a brand of waterproof material in strict accordance with the construction process brushing, the key to moisture is to try not to move or reduce the bathroom pipe movement.
If you want to change the pipeline, waterproof construction details must be more stringent, not only the pipeline needs to be horizontal and vertical, laying a solid, pipe roots in the water-proof material before painting, must be cleaned and brushed 2-3 times, especially floor drain, should Set in the lowest place on the bathroom floor to facilitate the discharge of water.
After waterproofing is completed, a 24-hour water-repellent test must be conducted to block the toilet's water outlet. The water in the toilet is 3-4 cm thick. After 24 hours, there is no leakage. If no leakage is observed, the waterproof layer can be successfully waterproofed. .
In addition, valves, faucets and other pipe fittings should also be put on waterproof 'clothing', the tube painted anti-rust coating, dark pipe brush anti-corrosion paint, water supply pipes and accessories, appliances, connections should be tight, no leakage through the water test. Ceramic sanitary ware, stainless steel and other hardware (shower heads, faucets, etc.) should be regularly cared for. It is best to use toothpaste and toothbrush when decontaminating. The friction is small but the cleaning effect is excellent. The protective film on the sanitary ware will not be destroyed and the mold will be effectively prevented.
Try to choose waterproof moisture-proof plate
The moisture resistance of the materials used in the bathroom is also critical. The floor of the bathroom is best to choose tiles, bricks, moisture-proof effect is better, but also easier to clean. Tiles are generally used for walls. If special materials such as waterproof wallpapers are used, the ventilation conditions of the bathroom must be considered.
The furniture of the bathroom furniture can not be sloppy, the furniture of the cabinet board should be selected waterproof, moisture-proof plate, the selection should pay attention to the processing of furniture backplane, the use of double decorative veneer back plate can prevent the exposure of the MDF substrate, water vapor It is not easy to enter the plate from the back of the cabinet and has a good moisture-proof effect. It is also necessary to pay attention to whether the edge of the furniture is tight, and the excessively thin edge of the panel can easily cause the penetration of water vapor.
When placing bathroom furniture, it is necessary to pay attention to wet and dry areas, and try to place the furniture away from the bathroom cabinet. The ventilation is in a good position. If the ventilation of the bathroom is poor, designers can design a water screen to plan and dry out. Wet area.
Do daily moisture protection
Bathroom moisture-proof also need to do daily anti-moisture treatment, otherwise it will easily lead to indoor vapor condensation, causing furniture, hardware, soaking, resulting in corrosion, mildew.
After washing and bathing, there will be a lot of water droplets and water vapor in the bathroom. If there are windows in the bathroom, be sure to open the window for ventilation, and then clean up the remaining water droplets on the floor with a mop.
The back of the bathroom furniture is often overlooked during cleaning and tends to condense more condensed water. Therefore, it is advisable to leave an appropriate gap in the bathroom furniture for cleaning, or to select the front, back and bottom hanging bathroom cabinets to clean the condensation. Water is very convenient. Bathroom hardware, water vapor, and water droplets on the faucet also need to be regularly cleaned. Especially after the shower, there are a lot of water droplets on the hardware and should be promptly cleaned with a dry cloth.