Aluminum alloy sand type low-pressure casting coating and preparation method thereof

Aluminum alloy sand type low-pressure casting coating and preparation method thereof

【China Aluminum Industry Net】An aluminum alloy sand-type paint for low pressure casting and its preparation method. It is used to add nano titanium oxide, which promotes thermal stability and compactness of aggregate particles, to the raw material components to promote coating suspension. Improved, brushing performance, shelf life of the stabilizer; its raw material mass percentage composition, aggregate: talc 37% to 73%, nano titanium oxide 10% to 23%, bauxite 8% to 17% Adhesive: 1% to 6% of sodium bentonite, 8% to 17% of silica sol, and 0.5% to 1.0% of stabilizer; thereby obtaining a technical solution of high mechanical strength and good adhesion of the surface coating of the casting; Long-term existence in the industry: poor thermal stability of coatings, coating cracks, spalling, coating particles do not densely packed aggregates, coating suspension is low, aggregates tend to agglomerate, paint brushing, storage are poor Such defects; The present invention is suitable for non-ferrous metal casting; Particularly suitable for low pressure aluminum alloy resin sand casting.

Forstner Bits

Forstner bits, flat-bottomed to drill holes in wood materials, they can cut on the edge of a block of wood, and can cut overlapping holes; for such applications they are normally used in drill presses or lathes rather than in hand-held electric drills. Because of the flat bottom of the hole, they are useful for drilling through veneer already glued to add an inlay.

The bit includes a center point which guides it throughout the cut (and incidentally spoils the otherwise flat bottom of the hole). The cylindrical cutter around the perimeter shears the wood fibers at the edge of the bore, and also helps guide the bit into the material more precisely.

Forstner bits have radial cutting edges to plane off the material at the bottom of the hole. The bits shown in the images have two radial edges; other designs may have more. Forstner bits have no mechanism to clear chips from the hole, and therefore must be pulled out periodically.

3 (13)1

Forstner Bits,bosch forstner bits,colt forstner bits

Behappy Crafts (suzhou)Co.,Ltd , https://www.behappyindustry.com