After the floor has been used for a period of time, it needs maintenance and waxing. Waxing floor need to pay attention to what?
Scholarly door parquet
1. Choose a sunny weather and wax: The humidity is too high on rainy days and waxing will cause cloudiness. When the room temperature is below 5 degrees, the floor wax will harden. Before waxing, do not wipe the floor with a rag containing chemicals. This can cause poor adhesion of the floor wax.
2. Remove trash and dirt from the floor surface. Use a vacuum cleaner to remove trash and dust from the floor surface. Wipe the stain on the floor with a diluted neutral detergent. For difficult-to-remove stains, please clean with water. To prevent the detergent from accumulating in the grooves, the rag soaked with detergent should be wrung out as much as possible. Floor wax scavengers can cause floor stains and bulging and must not be used.
3. Wipe with a wrung rag. Wipe with a well-wrung rag. The surface of the floor, especially the grooved part, should be carefully wiped and there should be no residual detergent. If there is residual detergent and moisture, the surface will be whitened and bulging.
4. Fully dry: The moisture on the floor surface and groove is completely dry for waxing. According to the season, the time required will change, but it will take more than half a day. If not fully dried, the floor wax will not adhere closely to the floor surface, affecting the appearance and causing whitening.
Home care nature floor del floor
Ptfe Filled Spiral Wound Gasket,Ptfe Spiral Wound Gasket Temperature,Expanded Ptfe Spiral Wound Gasket,Ptfe Spiral Wound Gasket
Cixi Congfeng Fluorine Plastic Co.,Ltd , https://www.cfptfeseal.com