Nowadays, people are paying more and more attention to the decoration of the bathroom, and the pursuit of the taste of life has also improved a lot. For the design of the bathroom size, location, color, etc. must have a certain degree of paranoia, especially the bathroom details to install this piece. Today, Xiaobian will briefly introduce the installation details of the high shower faucet.
1. The hot water outlet of the wall of the high shower faucet should be installed. The height of the two inner wire joints should be the same, so that the main body and the shower rod will not be skewed.
2. Where the high shower faucet is installed on the wall of the hot and cold water outlet, the two inner wire interfaces should be in accordance with the angle, so that there is no hidden danger such as poor installation and water leakage.
3. The wall of the high shower faucet is installed with hot and cold water outlets. The wall surface after the tile is laid is flush with the two inner wires. It is not suitable for over-indentation or bulging, so the installation will be smoother.
4. The installation of the internal waterway and circuit position of the high shower faucet should be clearly marked on the wall so that the pipeline will not be drilled when drilling.
5. Installation of high shower faucets should not be hollow and avoid rupture of tiles when drilling.
As for the choice of high shower faucets, there are single water, double water, and three water. This depends on personal hobbies, each with its own conveniences and advantages and disadvantages.
If you are planning to install a high shower faucet, please pay attention to the installation details of the high shower faucet mentioned above, which will not only save the trouble of decoration, but also give you a good shower enjoyment.
Vortex Spring,Coil Springs,Vortex Coil Spring,Vortex Coil Spring Processing
Dongguan Jiufukai Hardware Products Co., Ltd , https://www.jfkspring.com