| Home>Bearing knowledge>How to protect and protect spindle bearings? |
How to protect and protect the spindle bearing?
Source: Bearing network time: 2018-04-14
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
First of all; the spindle bearing in the spindle should be sufficient to ensure smoothness when working; and smooth oil should be added according to the actual application; no oil can be cut off for a long time. Therefore, for the user company; better and more suitable spindle should be used. Oil. The new special spindle oil can significantly improve the smooth function; extend the oil change cycle; extend the service life of the spindle and bearing; also has better anti-rust and anti-corrosion functions.
Secondly; the bearing of the reinforced nylon data holder should be used, the operating temperature should be lower than 120 °C, and the cooking should be prohibited.
Others; should pay attention to the method when removing the spindle protection; prevent damage and scratch the appearance of the roller. It is necessary to remove the residue of the bearing part as much as possible; it is better to use the method of scouring and suctioning the inside of the spindle to remove the residual oil. The dumping type causes the waste to accumulate and remains in the bearing part; it causes problems such as noise and wear failure of the bearing.
Recommend to friends comments close window
| Bearing related knowledge |
| INA bearing application considerations Hydraulic excavator work equipment shaft and bearing depiction (1) Proof of the use and characteristics of spherical roller bearings Marssite quenching and tempering of high carbon chromium bearing steel for NSK bearing installations |
This article links to http://
Please indicate China Bearing Network http://
Previous:Rolling bearing blanking specification Next: FAG imported bearing anti-rust auxiliary materials
Led Down Light,Ceiling Down Light,Ceiling Led Down Light,Cob Led Downlight
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com