In the production of cabinets, we will use a variety of materials, of which molded doors are very popular, this material is very commonly used in cabinets. What about molded doors for cabinets? What are the advantages and disadvantages of molded doors for cabinets? Let us take these questions together to understand how to use molded doors for cabinets !
How about molded doors for cabinets
1. Rich texture
Relatively speaking, cabinets made of door panels made of this material have rich textures and various colors, which can give consumers many choices. This is because the color and texture of the molded cabinet door panel is determined by the PVC film covered on the surface, so if the cabinet molded door is good, it has better decoration, and the surface of the molded cabinet door panel can be Made into various three-dimensional shapes, it can be cleverly matched with various home decoration styles.
2. Stable quality
The door panel of this material has good stability, even if it is used for a long time, it is not easy to deform, crack, and will not expand, shrink and warp. Because the molded board can be sealed into four sides by suction molding, it does not need to be edge-sealed during the production process, which can effectively solve the problems of long-term opening of the edge of the board and easy to be exposed to water.
3. Good wear and heat resistance
When we cook food, it will produce a lot of oil fumes, and it is also easy to grind the cabinet when using knives. This type of door panel has good wear and heat resistance, no cracking and deformation, and simple daily maintenance. It can be said that the molded door panel is a relatively mature cabinet material on the market. If the home chooses European or rural decoration design, molded cabinet door is a good choice.
Disadvantages of molded doors in cabinets
1. Poor high temperature resistance
In the kitchen, we often use an open flame, which will produce high temperature, and its poor high temperature resistance, can be in contact with high temperature objects for a long time, otherwise it is easy to deform and other phenomena. In the kitchen with molded cabinets, we also try not to smoke, otherwise the molded door panels will change color due to high temperature. And its fire resistance is poor, so everyone should try to avoid direct high temperature.
2. The design cannot be too long
In addition, when designing cabinets with molded door panels, we should pay attention to the fact that its main body cannot be too long, otherwise it will easily deform. This is because the PVC molded door panel is made by hot-pressing during the manufacturing process, and certain phenomena of thermal expansion and contraction will inevitably occur, and after cooling, it will be recessed in the direction of the PVC film.
Editor's note: The above is the relevant content of the molded door of the cabinet explained by the Qi family editor and everyone, I hope to give you some reference! More related content, you can pay attention to Qi family information, and more exciting content will be presented in the future. !
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
How about molded doors for cabinets
Solenoid valves are electromechanical devices that are used to control the flow of fluids or gases in a variety of applications. They are classified based on their function, construction, and application.
Based on Function:
1. Normally Closed (NC) Solenoid Valve: In this type of valve, the valve is closed when there is no power supply to the solenoid coil. The valve opens when the coil is energized.
2. Normally Open (NO) Solenoid Valve: In this type of valve, the valve is open when there is no power supply to the solenoid coil. The valve closes when the coil is energized.
3. Direct Acting Solenoid Valve: In this type of valve, the solenoid coil directly controls the valve stem, which opens or closes the valve.
4. Pilot Operated Solenoid Valve: In this type of valve, the solenoid coil controls a pilot valve, which in turn controls the main valve.
Based on Construction:
1. Brass Solenoid Valve: These valves are made of brass and are used in applications where the fluid or gas is not corrosive.
2. Stainless Steel Solenoid Valve: These valves are made of stainless steel and are used in applications where the fluid or gas is corrosive.
3. Plastic Solenoid Valve: These valves are made of plastic and are used in applications where the fluid or gas is not corrosive and the valve is not subjected to high pressure.
Based on Application:
1. Solenoid Water Valve: These valves are used in applications where water is the fluid being controlled.
2. Solenoid Air Valve: These valves are used in applications where gas is the fluid being controlled.
3. Steam Solenoid Valve: These valves are used in applications where steam is the fluid being controlled.
4. Fuel Solenoid Valve: These valves are used in applications where fuel is the fluid being controlled.
Solenoid Valve,Mini Solenoid Air Valve,Normally Open One-Way Solenoid Air Valve,3V Electric Solenoid Air Valve
Shenzhen DYX Technology Co.,Limited , https://www.dyxpump.com