Hydroelectricity inspection should be carefully
Hydroelectricity inspection is the most important item for acceptance. The owner can request the decoration company to conduct the pressure test, and the owner is better to participate in the test to see if there is any leakage. At the same time can splash a pot of water in the bathroom to see if there is no water phenomenon.
Electricity is also an important project. The industry mainly requests the professional electrician of the decoration company to carry out power inspection. When the owner accepts the inspection, the lamp can be turned on to see if the power supply is on. See if the power supply is normal, and if the problem is found, it can be repaired in time.
Wall formation is very important
Whether the wall surface is smooth or not is also an important project. In addition to affecting the appearance, uneven walls are also more prone to cracking. The owner can look at the naked eye and check with the ruler to see if the inside corner is square and there are problems.
Wood quality must be environmentally friendly
The quality of the wood can be observed by seeing whether the paint has a color difference, whether it has a falling phenomenon, and whether it has a pungent odor.
Cleaning work should be supervised
Finishing decoration should require decoration company to do a good job of cleaning, the standard is clear and bright, iron bright, no dust indoors, general decoration company should use a vacuum cleaner for final cleaning.
Environmental monitoring is best done
After the acceptance of the decoration, we must promptly ventilate. In the winter, it is best to be between 1 noon and 3 pm. If there are irritating smells after 5 days, it is better to do environmental monitoring. It is necessary to emphasize that the best furniture is not to be fast. Move in so as not to cause liability problems caused by unqualified air quality.
If you choose to strengthen the wooden floor or parquet, it is best to choose the regular brand of qualified products, do not pursue low prices, due to low-cost floor caused by unqualified air quality problems have occurred, the decoration company will not bear the responsibility.
In addition, the national environmental protection standard is not more than 8 milligrams of formaldehyde per cubic meter. It is best to control about 4 milligrams per cubic meter before the furniture is moved in, so as not to exceed the standard after moving into furniture.
Therefore, the decoration program should be as reasonable and concise as possible. The more complicated and luxurious the decoration, the more likely it is to have hidden dangers. At the same time, it is necessary to select building materials with low levels of harmful substances and avoid excessive single substances in excess of the hazardous substances. The total amount of harmful substances in the room exceeds the standard.
Construction Acceptance Decorating Decoration Company Furniture Cleaning Company Interior Renovation Decoration Company
Low porosity clay bricks are made of low aluminum mullite as the main raw material, formed by high pressure molding and high temperature sintering. The main mineral composition is mullite phase, the product has excellent high temperature physical properties and chemical erosion resistance.
Low porosity clay brick stability is good, the degree of erosion does not occur sudden change, than ordinary clay brick life increased by 2 to 3 times. Thermal conductivity, specific heat and solubility, respectively, than ordinary clay bricks 2 times higher than 10% and 40%, heat storage capacity than ordinary clay bricks 50% to 60% higher than the thermal efficiency of the kiln can be improved.
Low porosity clay bricks are characterized by:
1. Low porosity, 13 to 15%;
2. Load softening temperature is high for about 1472 ℃;
3. High compressive strength at room temperature, generally about 100MPa;
4. Good volume stability at high temperature and good abrasion resistance;
5. good resistance to infiltration and erosion.
Low porosity clay brick as a good clay refractory brick products, so often used in chemical erosion, temperature fluctuations in the environment, such as steel, glass, chemical industry. The effect is quite obvious in the use of glass hot room and the use of iron water tank.
Suitable for Plugging Oven Holes,Clogging Refractory Clay Bricks,Clogging Refractory Clay Brick
Huixian Xinwei Refractories Co. , https://www.xinweirefractory.com