Price Competitive with SGS ISO9001 Certificated FRP Fiberglass Pipes

The features of FRP pipes:
 
1) Made from the high quality corrossion resistant resin and continuous fiber winding without            
    alkali, healthful, innocuous: it can be used the piping system of pure water and drinking water
 
2)Anticorrosion, anti-encumbrance: using the piping can avoid the rustlings of laver and bathtub which was given rise to by piping rust eaten and it also can avoid the clogging which induces by piping rust eaten
 
3) Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time
 
4) Lightness,high strength,distinguished corrosion resistance,  
 
5) High temperature and pressure resistant
 
6) Heat preservation and energy saving
 
7)Beautiful shape: the inside and outside of the production is very lubricous, fluid resistance is little,         color and luster is very meekness and it has attractive appearance
 
 The fitting of the piping is very convenient and credible

FRP physical and other performance parameters

Pipes & Ducts
Pipes & ducts are manufactured using filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall.
Nominal diameter
Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 50 to 4500 mm.
Nominal pressure classes:
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 2.5,4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions
Nominal lengths
Pipes have a length of six meters up to DN150 and 12 meters for bigger diameters.
Fittings
A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available.
Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.
Prefabrication spools
Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.\



Application
 
1) Residential cold and hot water system 
 
2)Underground heating system
 
3)Conveyor of industrial water and chemical material
 
4)Sanitary and pure water
 
5)Hot water recycling system
 
6)Compressed air pipeline
 
7)Drink manufacturing and conveying system
 
8)Other industrial and agricultural pipeline



FRP quartz sand inclusion winding pipe structure composed of four parts
such as the lining layer, transition layer, structural layer (containing quartz sand layer) and protective layer.

Liner
Also known as anti leakage and corrosion layers. Play a key role in impermeable and anti-corrosion for the pipeline. The inner surface layer is composed of  90% resin, 10% of surface mat. According to the level of the pipe diameter and pressure, the thickness of the lining is 1.5-2.5mm.

transition layer
composed of two layers of chopped strand mat and 75 ± 5% of the resin. role is to prevent the capillary phenomenon.

structural layer
 The layer is a filament-wound layer, which is the key strength of the product. the resin content is 30 ± 5%. in order to increase the stiffness of the pipeline, so join the quartz sand in the layer, the thickness according to case of external force.

protective layer
also known as the outer protective layer. this layer is the outermost layer of the pipe, made of 100% of the resin, and its role is to prevent the pipe buried in the ground from soil erosion in corrosive media. In addition, the layer added plasticizer, anti-aging agent, increase the service life. generally, its thickness is 0.25-0.5mm



Relate Product




FAQ

Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP machines manufacture in china.
Q: Can your factory give us a best quotation?
A:Yes,we can.
Q: how about after-sales service?
A: 1 year free warranty, Lifetime technical service support.
Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.


We are looking forward to cooperate with you! If you are interested, kindly feel free to contact us!





  The features of FRP pipes:
 
1) Made from the high quality corrossion resistant resin and continuous fiber winding without            
    alkali, healthful, innocuous: it can be used the piping system of pure water and drinking water
 
2)Anticorrosion, anti-encumbrance: using the piping can avoid the rustlings of laver and bathtub which was given rise to by piping rust eaten and it also can avoid the clogging which induces by piping rust eaten
 
3) Good low temperature resistant, it can be used under the condition of -45°C-120°C for long time
 
4) Lightness,high strength,distinguished corrosion resistance,  
 
5) High temperature and pressure resistant
 
6) Heat preservation and energy saving
 
7)Beautiful shape: the inside and outside of the production is very lubricous, fluid resistance is little,         color and luster is very meekness and it has attractive appearance
 
 The fitting of the piping is very convenient and credible

FRP physical and other performance parameters

Pipes & Ducts
Pipes & ducts are manufactured using filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall.
Nominal diameter
Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 50 to 4500 mm.
Nominal pressure classes:
Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 2.5,4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions
Nominal lengths
Pipes have a length of six meters up to DN150 and 12 meters for bigger diameters.
Fittings
A wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available.
Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.
Prefabrication spools
Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.\



Application
 
1) Residential cold and hot water system 
 
2)Underground heating system
 
3)Conveyor of industrial water and chemical material
 
4)Sanitary and pure water
 
5)Hot water recycling system
 
6)Compressed air pipeline
 
7)Drink manufacturing and conveying system
 
8)Other industrial and agricultural pipeline



FRP quartz sand inclusion winding pipe structure composed of four parts
such as the lining layer, transition layer, structural layer (containing quartz sand layer) and protective layer.

Liner
Also known as anti leakage and corrosion layers. Play a key role in impermeable and anti-corrosion for the pipeline. The inner surface layer is composed of  90% resin, 10% of surface mat. According to the level of the pipe diameter and pressure, the thickness of the lining is 1.5-2.5mm.

transition layer
composed of two layers of chopped strand mat and 75 ± 5% of the resin. role is to prevent the capillary phenomenon.

structural layer
 The layer is a filament-wound layer, which is the key strength of the product. the resin content is 30 ± 5%. in order to increase the stiffness of the pipeline, so join the quartz sand in the layer, the thickness according to case of external force.

protective layer
also known as the outer protective layer. this layer is the outermost layer of the pipe, made of 100% of the resin, and its role is to prevent the pipe buried in the ground from soil erosion in corrosive media. In addition, the layer added plasticizer, anti-aging agent, increase the service life. generally, its thickness is 0.25-0.5mm



Relate Product




FAQ

Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP machines manufacture in china.
Q: Can your factory give us a best quotation?
A:Yes,we can.
Q: how about after-sales service?
A: 1 year free warranty, Lifetime technical service support.
Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.


We are looking forward to cooperate with you! If you are interested, kindly feel free to contact us!





 

Ceiling Light

Ceiling Light,Rectangle Delicate Ceiling Light,Round Crystalceiling Light,Bedroom Decoration Ceiling Light

ZHONGSHAN DIKA LIGHTING CO.,LTD , https://www.dikalighting.com