| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree, the whole circuit will be cut off. |
|||
| Plastic material | At present, this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
| ZX1600 | ZX3400 | 1.Power cord |
| Voltage(V):42 100 120 200 230 For 50/60Hz | Voltage(V):200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W):960 1400 1600 | Power consumption(W):3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg):1.3 with 3m cord | Weight (kg):1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature:20-700 degrees Celsius, infinitely controlled | 6.Air fillter | |
| Air flow (1/min):Max.230 | 7.Rubber stand | |
| Air pressure (pa):3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):Customized | 9.Heat protection tube | |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards, tubes profiles, lining membranes, coated materials, films, foams, tiles and sheets.The following procedures are possible:Overlap welding, welding with rod, with tape, butt welding and melt welding.
Heating - up for forming, bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves, films, tapes, solder sleeves, pre formd and moulded parts.
Soldering of copper pipes, solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings, paper, coal or straw in furnaces. Stable Temperature Hot Air PVC Plastic Seaming Machine
| Hot air welder | ||||
| Temperature controll | We use photocell to controll temperature inside. | |||
| Temperature switch | Outside of the gun there is temperature switch. And once the plastic body is above 135 degree, the whole circuit will be cut off. |
|||
| Plastic material | At present, this plastic is one can resist the highest temperature. It can resist 280 degree. |
|||
| Bearing | We use high temperature bearing manufactured in Japan. | |||
| Ceramic heating element | We use Swedish heating wire for ceramic heating element inside the hot air gun. And ceramic material is also good quality. It can resist high temperature 1650C. |
|||
TECHNICAL DATA:
| ZX1600 | ZX3400 | 1.Power cord |
| Voltage(V):42 100 120 200 230 For 50/60Hz | Voltage(V):200 230 For 50/60Hz | 2.Main switch 3.Screw on the clamp |
| Power consumption(W):960 1400 1600 | Power consumption(W):3400 | 4.Potentionmeter for temperature adjustment |
| Weight (kg):1.3 with 3m cord | Weight (kg):1.4 with 3m cord | 5.Handle & Nozzle |
| Temerature:20-700 degrees Celsius, infinitely controlled | 6.Air fillter | |
| Air flow (1/min):Max.230 | 7.Rubber stand | |
| Air pressure (pa):3000 (30mbar)after about 24 h operating time | 8.Adapter tube | |
| Size (mm):Customized | 9.Heat protection tube | |
APPLICATION:
Welding of thermoplastic materials as well as single - ply flexible plastic and modified bitumen in the form of boards, tubes profiles, lining membranes, coated materials, films, foams, tiles and sheets.The following procedures are possible:Overlap welding, welding with rod, with tape, butt welding and melt welding.
Heating - up for forming, bending and sealing of thermoplastic semi- finished materials and plastic granules.
Dry of water - damp surfaces.
Shrinking of heat shrink sleeves, films, tapes, solder sleeves, pre formd and moulded parts.
Soldering of copper pipes, solder joints and metal foils.
Defrosting of frozen water pipes.
Activating / Dissolving of solvent free adhesives and fusion adhesives.
Igniting of wood shavings, paper, coal or straw in furnaces.
Pendant Light
This stylish pendant light of LEDER technology hanging lantern provides form and function over your kitchen island or entryway.A simple geometric shade made from metal gives it an open look, while its neutral black finish allows it to blend in with a variety of color palettes.
This one-light indoor pendant light offered in a burnt sienna, dark weathered gray or brushed nickel finish is the ultimate in industrial chic, with a warehouse look in a sleek and subtle profile. The over-scaled proportions make it an impact focal point for the best task light fixture, whether installed as a single pendant or in multiples.Best of all, this light works with any dimmer switch, allowing you to change up the lighting from breakfast to dinner.
Features:
• The appearance is exquisite and beautiful
• Retro and Elegant Design
• The price is satisfactory
• Energy saving save electricity
• Installation is simple
• Color temperature :3000k-6000K
• Wide range of application
• Type of protection: IP20
• Warranty for bulbs :2 years
Fusing function and elegance, this pendant light brings decoration and illumination to your interior space. The decorative slots added some clean and simple lines to its cylinder design. Hanging it in your living room, kitchen, and island for a touch of contemporary and artful appeal.
We have rich production experience in lighting.Except Decoration Lighting , we also offered other product in Indoor Lighting .Such as :
LED Panel Light , Track Light , Linear Light ,Wall Light , LED Strip Light , LED Tube Light , Cabinet Light , LED Bulb , LED Ceiling Light as so on .
Classic Pendant Light,Led Pendant Lighting,Led Hanging Light,Lowes Pendant Lights
JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.wallwasherlights.com