On the occasion of the Fourth Session of the Eleventh National People's Congress and the Fourth Session of the Eleventh National Committee of the Chinese People's Political Consultative Conference, the first working conference of the China Machine Tool Industry Association in 2011 was held in Beijing from March 15 to 16. The meeting was attended by Wu Bolin, Executive Vice President of China Machine Tool Industry Association, Yu Chengting, Honorary Chairman, Wang Liming, Executive Vice President and Secretary General, Yan Liangzhi, Executive Vice President, Deputy Secretary-General Mao Yufeng, Li Jingming, 25 Branch Secretariat and The heads of the six professional committees and the staff of the permanent establishments of the association total more than 50 people. The meeting was chaired by Yan Liangzhi and Mao Yufeng. ![]()
The main contents of the meeting are: Wang Liming's 2010 economic operation report of the machine tool industry and the introduction of the industry's “Twelfth Five-Year Planâ€; Mao Yufeng's work summary for the 2010 branch and the introduction of the work focus of the 2011 branch; Li Jingming is the twelfth The preparations for the China International Machine Tool Exhibition (CIMT2011), the characteristics of the exhibition, important events and other relevant information; the Deputy Director of the Ministry of Industry Shao Qin as the introduction of the current and future industry major work; commended the 2010 Advanced Branch; Work communication. Finally, Wu Bolin made a summary of the conference. Document.write(" ");xno = xno+1; The first meeting of the Secretary-General of China Machine Tool Industry Association in 2011 was held in Beijing on March 15, 2011. All members of the leadership team and heads of departments of the General Assembly were present. The secretary-general of each branch is nearly 50. The main topics of the meeting are: 1. summarizing the work in 2010, 2. deploying the main points of work in 2011, 3. notifying the economic operation of the industry, 4. summarizing the work of the branch, 5. notifying the work of CIMT2011, 6 In recognition of the 2010 Advanced Branch, 7. Exchange speech. The meeting was chaired by Executive Vice President Yan Liangzhi. He said that the 2010 work summary and the 2011 work points have been printed for everyone, I hope to read it carefully, and everyone can talk about it when they exchange their speeches. First of all, the Executive Vice President and Secretary General Wang Liming informed the industry's economic performance. He said that in 2010, the machine tool industry maintained rapid growth in production and sales, with a total industrial output value of 553.68 billion yuan, a year-on-year increase of 40.6%, and a sales value of 543.44 billion yuan. , an increase of 41.4% year-on-year, the sales rate of industrial products reached 98.2%, an increase of 0.6 percentage points year-on-year; the profit as of November 2010 reached 31.05 billion yuan, an increase of 66.1%. The mouth reached 7.03 billion US dollars, a large increase year-on-year, but did not reach the highest level of 7.13 billion in 2008. He also introduced the economic situation of small industries, of which the abrasives industry exports reached 1.53 billion US dollars, more than 100%. When talking about the market situation, he mentioned that although the structural adjustment of China's machine tool products has made progress, it still has a long way to go, and it still needs to make great efforts to further increase the proportion of medium and high-end products. When predicting the development in 2011, he expects the overall growth of the industry. It will be greater than 10%, but considering that the National Bureau of Statistics will increase the number of enterprises above designated size from 5 million yuan to 20 million yuan, the statistics of 2011 will have problems with the data of 2010. Vice President Wang Liming also introduced The preparation of the 12th Five-Year Plan, the draft plan was interpreted. Deputy Secretary-General Mao Yufeng made a report on the work of the club. The branches have done a lot of work in the statistical analysis of their respective small industry economic data, overcoming many difficulties and basically completing the statistics. Analytical work. He praised many chapters such as coated abrasives, superhard materials, numerical control, etc., and praised the special The achievements of standardization work such as engineering, numerical control, and grinding machine branch commended the professional skill appraisal work carried out by the superhard materials branch. He emphasized that the club should strengthen the standard revision and revision work. Each chapter has its own characteristics, and the overall work for the completion of the general meeting is He made a contribution and contributed to the AAAA Association by the Ministry of Civil Affairs. He called on the clubs to strengthen the development of new members and expand the industry coverage of the members. He said that the clubs were caused by local policy differences. The licenses are not uniform. If there are branches, the organization code certificate, tax registration certificate, and some are not; some branches have separate accounts, some do not; etc. The general will conduct research to strengthen the management of the club. When talking about the work priorities of the club in 2011, he pointed out: 1. It is necessary to actively promote product structure adjustment around the main points of the work of the General Conference, 2. Strengthen the construction of statistical information network, 3. Innovate work ideas and methods, and serve enterprises in various fields, 4 Strengthen the work of standard revision and revision, 5. Actively carry out the review activities of exhibits, 6. Strengthen the construction of the clubs, select the directors' units, establish an efficient secretariat, and train and select the secretary-general who is passionate about the industry and has influence in the industry. ,and many more. Deputy Secretary-General Li Jingming informed the preparations for CIMT2011: 120,000 m2 of exhibitions, 28 countries and regions participated in the exhibition, more than 1,400 exhibitors, well-known enterprises at home and abroad, including 650 overseas exhibitors. The theme of the exhibition: technological innovation, to meet the post-crisis era. During the exhibition, aerospace, military, energy, shipbuilding, automobile and other user groups attended the conference, and there were many high-level forums. Leaders of government departments, leaders of machine tool associations around the world, and well-known enterprises attended the conference. The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the National Defense Science and Technology Bureau will hold military industry and other industry equipment symposiums during the exhibition. Six “Top Ten†corporate awards will be held during the exhibition; 61 technical exchanges and lectures will be held, two-thirds of which will be lectures by foreign companies. Shao Qin, deputy director of the industry department, reported on the evaluation of the six “Top Ten†enterprises, the recommended catalogue of domestic CNC machine tools in 2010, the research on soft topics in the industry, the research on the industry, the development of standard quality, the safety improvement of machine tools, and the review of exhibits. working condition. Executive Vice President Yan Liangzhi read the decision to commend the advanced club. The nine branches of superhard materials, coated abrasives, numerical control, special processing, heavy-duty machine tools, tools, milling machines, grinding machines and machine tool accessories won the title of 2010 Advanced Branch. The leaders of the General Assembly issued certificates of honor to the nine clubs. This is the fifth consecutive year that the Superhard Materials Branch won the title of Advanced Branch. Subsequently, the General Assembly entered the stage of the exchange of speeches by the Secretary-General of the Branch, and the exchange speech was presided over by Deputy Secretary-General Mao Yufeng. The Secretary-General of each chapter made a lively speech on the main points of work in 2011 and other contents of the meeting. Some of the six "Top Ten" companies that have proposed the general evaluation have some unreasonable phenomena, such as the top ten enterprises with sales revenue and the top ten enterprises for product exports. The largest enterprises are always the top ten, and SMEs will never have a chance. Factors such as per capita output value, export volume to total sales, and growth rate are more reasonable. Wu Bolin, the executive vice chairman, intervened to acknowledge the problems in the work, and promised to comprehensively study and revise the evaluation indicators and conditions this year, and strive to be more fair and reasonable. Some proposed the joint development of heavy-duty machine tools and multi-enterprise joint development, and the joint development of the university, and raised the question: the enterprise that had never done a roll grinder got the major special task of this project. Vice Chairman Wu said that the process may have problems. The leaders of the Ministry of Industry and Information Technology also realized some problems in the implementation of major special projects, saying that they should try to avoid problems in the next stage of work. The next step is how to implement the implementation of the special organization of the seven strategic emerging industries. I hope that the relevant clubs will gather ideas and make full preparations to avoid problems. Some raised the issue of the establishment and implementation of the industry price system. Some suggest that the leaders will pay attention to the projects and development of the super-hard materials industry in the process of exchanges with the Ministry of Industry and other state agencies, and urge the relevant departments of the state to provide special support for super-hard materials and products. Some highlight the experience of the work of the club. Everyone spoke enthusiastically, so it is recommended to fold up and have inspiration and reference for the participants. Wu Bolin, executive vice chairman, finally made a concluding speech. He said that the exchanges were very enthusiastic and I was inspired a lot, so I would like to say a few more in my concluding remarks. First of all, I would like to thank the clubs for their fruitful work in the past year. Thank you for your constructive comments and thank you for your active speech. Everyone is under great pressure at work, overcomes many difficulties, dares to innovate, and does a lot of work in a more pragmatic way. Many clubs have been innovative in the past year. Congratulations to the nine clubs that have won the honorary title of the advanced club. To tell the truth, the evaluation is not good, because most of the work is very good. If the evaluation is good, there are a few clubs that work obviously not well. In the coming year, the permanent establishment should focus on the enthusiasm of the mobilization of the club. The next step is to summarize the main points of work this year. The results are not mentioned here, mainly about the problems: 1. The medium and high-end products lack market competitiveness, and the degree of industrialization is not high. Despite the great achievements in the past few years, new products emerge one after another. The rapid growth of import data can be used as a circumstantial evidence. If the competitiveness is strong, the reduction in imports will be correct. The vast majority of imports are high-end products, and the export of high-end products is rare. The problem is that deep technology is not addressed. It looks like God does not seem to solve the problem. The future market is developing towards CNC. It is good to develop new products, and we must redouble our efforts to turn them into commodities. 2. The numerical control system and functional components are soft ribs. During the "Twelfth Five-Year Plan" period, we must focus on solving these two problems. However, we must be clear that the numerical control system and functional components are well done, and it is not equal to the CNC machine tools. It requires the joint efforts of the various branches to make CNC machine tools. Well, we can complete the major special tasks of CNC machine tools. 3. The mode of development needs to be changed. Our important problem is to focus on "hard" and "soft", technically, and manufacturing. Some of our machine tools are considered to have reached the world's advanced level, but the price is a fraction of that of foreign countries, and the depth and breadth of software development are not enough. The problem of selling heavy products and providing users with a complete solution is also outstanding. We must vigorously cultivate famous brand products and famous brand enterprises. Solving the above three major problems is the main task in the future. Not only self-respecting, but also arrogant, you must see the results, but also see the gap, bravely face challenges! China's high-speed railway and other key projects are still being implemented, and the huge demand market is still there, but the demand products are getting higher and higher, so it is necessary to attack the deep-level technology and high-end products. It is not impossible to catch up with the world's advanced level in the next 5 to 10 years. However, we must work hard and work hard to push forward the work. In addition, there are two main tasks: 4. Strengthening the talent team and the construction of the science and technology system. Strong technology must be strong. 5. Focus on promoting the manufacturing capability of the "two-in-one" integration. Vice Chairman Wu also gave a detailed introduction to the situation on March 3, when Vice Minister of the Ministry of Industry and Information Technology Su Bo reported on the implementation of the major special tools for machine tools. Vice Minister Su fully affirmed the work of the General Assembly. He said that the Machine Tool Association has done a good job and played a role. Big, social, industry, and government departments have a crush on you. There are some problems in the implementation of major special procedures for CNC machine tools. I will pay attention to this issue in the next step. In the future, the Ministry of Industry and Information Technology will rely on the association to carry out its work and do a good job in the implementation of major national special projects. After a thorough day of work, the meeting completed the scheduled agenda and closed the day. (Correspondent Li Li)
The main contents of the meeting are: Wang Liming's 2010 economic operation report of the machine tool industry and the introduction of the industry's “Twelfth Five-Year Planâ€; Mao Yufeng's work summary for the 2010 branch and the introduction of the work focus of the 2011 branch; Li Jingming is the twelfth The preparations for the China International Machine Tool Exhibition (CIMT2011), the characteristics of the exhibition, important events and other relevant information; the Deputy Director of the Ministry of Industry Shao Qin as the introduction of the current and future industry major work; commended the 2010 Advanced Branch; Work communication. Finally, Wu Bolin made a summary of the conference. Document.write(" ");xno = xno+1; The first meeting of the Secretary-General of China Machine Tool Industry Association in 2011 was held in Beijing on March 15, 2011. All members of the leadership team and heads of departments of the General Assembly were present. The secretary-general of each branch is nearly 50. The main topics of the meeting are: 1. summarizing the work in 2010, 2. deploying the main points of work in 2011, 3. notifying the economic operation of the industry, 4. summarizing the work of the branch, 5. notifying the work of CIMT2011, 6 In recognition of the 2010 Advanced Branch, 7. Exchange speech. The meeting was chaired by Executive Vice President Yan Liangzhi. He said that the 2010 work summary and the 2011 work points have been printed for everyone, I hope to read it carefully, and everyone can talk about it when they exchange their speeches. First of all, the Executive Vice President and Secretary General Wang Liming informed the industry's economic performance. He said that in 2010, the machine tool industry maintained rapid growth in production and sales, with a total industrial output value of 553.68 billion yuan, a year-on-year increase of 40.6%, and a sales value of 543.44 billion yuan. , an increase of 41.4% year-on-year, the sales rate of industrial products reached 98.2%, an increase of 0.6 percentage points year-on-year; the profit as of November 2010 reached 31.05 billion yuan, an increase of 66.1%. The mouth reached 7.03 billion US dollars, a large increase year-on-year, but did not reach the highest level of 7.13 billion in 2008. He also introduced the economic situation of small industries, of which the abrasives industry exports reached 1.53 billion US dollars, more than 100%. When talking about the market situation, he mentioned that although the structural adjustment of China's machine tool products has made progress, it still has a long way to go, and it still needs to make great efforts to further increase the proportion of medium and high-end products. When predicting the development in 2011, he expects the overall growth of the industry. It will be greater than 10%, but considering that the National Bureau of Statistics will increase the number of enterprises above designated size from 5 million yuan to 20 million yuan, the statistics of 2011 will have problems with the data of 2010. Vice President Wang Liming also introduced The preparation of the 12th Five-Year Plan, the draft plan was interpreted. Deputy Secretary-General Mao Yufeng made a report on the work of the club. The branches have done a lot of work in the statistical analysis of their respective small industry economic data, overcoming many difficulties and basically completing the statistics. Analytical work. He praised many chapters such as coated abrasives, superhard materials, numerical control, etc., and praised the special The achievements of standardization work such as engineering, numerical control, and grinding machine branch commended the professional skill appraisal work carried out by the superhard materials branch. He emphasized that the club should strengthen the standard revision and revision work. Each chapter has its own characteristics, and the overall work for the completion of the general meeting is He made a contribution and contributed to the AAAA Association by the Ministry of Civil Affairs. He called on the clubs to strengthen the development of new members and expand the industry coverage of the members. He said that the clubs were caused by local policy differences. The licenses are not uniform. If there are branches, the organization code certificate, tax registration certificate, and some are not; some branches have separate accounts, some do not; etc. The general will conduct research to strengthen the management of the club. When talking about the work priorities of the club in 2011, he pointed out: 1. It is necessary to actively promote product structure adjustment around the main points of the work of the General Conference, 2. Strengthen the construction of statistical information network, 3. Innovate work ideas and methods, and serve enterprises in various fields, 4 Strengthen the work of standard revision and revision, 5. Actively carry out the review activities of exhibits, 6. Strengthen the construction of the clubs, select the directors' units, establish an efficient secretariat, and train and select the secretary-general who is passionate about the industry and has influence in the industry. ,and many more. Deputy Secretary-General Li Jingming informed the preparations for CIMT2011: 120,000 m2 of exhibitions, 28 countries and regions participated in the exhibition, more than 1,400 exhibitors, well-known enterprises at home and abroad, including 650 overseas exhibitors. The theme of the exhibition: technological innovation, to meet the post-crisis era. During the exhibition, aerospace, military, energy, shipbuilding, automobile and other user groups attended the conference, and there were many high-level forums. Leaders of government departments, leaders of machine tool associations around the world, and well-known enterprises attended the conference. The National Development and Reform Commission, the Ministry of Industry and Information Technology, and the National Defense Science and Technology Bureau will hold military industry and other industry equipment symposiums during the exhibition. Six “Top Ten†corporate awards will be held during the exhibition; 61 technical exchanges and lectures will be held, two-thirds of which will be lectures by foreign companies. Shao Qin, deputy director of the industry department, reported on the evaluation of the six “Top Ten†enterprises, the recommended catalogue of domestic CNC machine tools in 2010, the research on soft topics in the industry, the research on the industry, the development of standard quality, the safety improvement of machine tools, and the review of exhibits. working condition. Executive Vice President Yan Liangzhi read the decision to commend the advanced club. The nine branches of superhard materials, coated abrasives, numerical control, special processing, heavy-duty machine tools, tools, milling machines, grinding machines and machine tool accessories won the title of 2010 Advanced Branch. The leaders of the General Assembly issued certificates of honor to the nine clubs. This is the fifth consecutive year that the Superhard Materials Branch won the title of Advanced Branch. Subsequently, the General Assembly entered the stage of the exchange of speeches by the Secretary-General of the Branch, and the exchange speech was presided over by Deputy Secretary-General Mao Yufeng. The Secretary-General of each chapter made a lively speech on the main points of work in 2011 and other contents of the meeting. Some of the six "Top Ten" companies that have proposed the general evaluation have some unreasonable phenomena, such as the top ten enterprises with sales revenue and the top ten enterprises for product exports. The largest enterprises are always the top ten, and SMEs will never have a chance. Factors such as per capita output value, export volume to total sales, and growth rate are more reasonable. Wu Bolin, the executive vice chairman, intervened to acknowledge the problems in the work, and promised to comprehensively study and revise the evaluation indicators and conditions this year, and strive to be more fair and reasonable. Some proposed the joint development of heavy-duty machine tools and multi-enterprise joint development, and the joint development of the university, and raised the question: the enterprise that had never done a roll grinder got the major special task of this project. Vice Chairman Wu said that the process may have problems. The leaders of the Ministry of Industry and Information Technology also realized some problems in the implementation of major special projects, saying that they should try to avoid problems in the next stage of work. The next step is how to implement the implementation of the special organization of the seven strategic emerging industries. I hope that the relevant clubs will gather ideas and make full preparations to avoid problems. Some raised the issue of the establishment and implementation of the industry price system. Some suggest that the leaders will pay attention to the projects and development of the super-hard materials industry in the process of exchanges with the Ministry of Industry and other state agencies, and urge the relevant departments of the state to provide special support for super-hard materials and products. Some highlight the experience of the work of the club. Everyone spoke enthusiastically, so it is recommended to fold up and have inspiration and reference for the participants. Wu Bolin, executive vice chairman, finally made a concluding speech. He said that the exchanges were very enthusiastic and I was inspired a lot, so I would like to say a few more in my concluding remarks. First of all, I would like to thank the clubs for their fruitful work in the past year. Thank you for your constructive comments and thank you for your active speech. Everyone is under great pressure at work, overcomes many difficulties, dares to innovate, and does a lot of work in a more pragmatic way. Many clubs have been innovative in the past year. Congratulations to the nine clubs that have won the honorary title of the advanced club. To tell the truth, the evaluation is not good, because most of the work is very good. If the evaluation is good, there are a few clubs that work obviously not well. In the coming year, the permanent establishment should focus on the enthusiasm of the mobilization of the club. The next step is to summarize the main points of work this year. The results are not mentioned here, mainly about the problems: 1. The medium and high-end products lack market competitiveness, and the degree of industrialization is not high. Despite the great achievements in the past few years, new products emerge one after another. The rapid growth of import data can be used as a circumstantial evidence. If the competitiveness is strong, the reduction in imports will be correct. The vast majority of imports are high-end products, and the export of high-end products is rare. The problem is that deep technology is not addressed. It looks like God does not seem to solve the problem. The future market is developing towards CNC. It is good to develop new products, and we must redouble our efforts to turn them into commodities. 2. The numerical control system and functional components are soft ribs. During the "Twelfth Five-Year Plan" period, we must focus on solving these two problems. However, we must be clear that the numerical control system and functional components are well done, and it is not equal to the CNC machine tools. It requires the joint efforts of the various branches to make CNC machine tools. Well, we can complete the major special tasks of CNC machine tools. 3. The mode of development needs to be changed. Our important problem is to focus on "hard" and "soft", technically, and manufacturing. Some of our machine tools are considered to have reached the world's advanced level, but the price is a fraction of that of foreign countries, and the depth and breadth of software development are not enough. The problem of selling heavy products and providing users with a complete solution is also outstanding. We must vigorously cultivate famous brand products and famous brand enterprises. Solving the above three major problems is the main task in the future. Not only self-respecting, but also arrogant, you must see the results, but also see the gap, bravely face challenges! China's high-speed railway and other key projects are still being implemented, and the huge demand market is still there, but the demand products are getting higher and higher, so it is necessary to attack the deep-level technology and high-end products. It is not impossible to catch up with the world's advanced level in the next 5 to 10 years. However, we must work hard and work hard to push forward the work. In addition, there are two main tasks: 4. Strengthening the talent team and the construction of the science and technology system. Strong technology must be strong. 5. Focus on promoting the manufacturing capability of the "two-in-one" integration. Vice Chairman Wu also gave a detailed introduction to the situation on March 3, when Vice Minister of the Ministry of Industry and Information Technology Su Bo reported on the implementation of the major special tools for machine tools. Vice Minister Su fully affirmed the work of the General Assembly. He said that the Machine Tool Association has done a good job and played a role. Big, social, industry, and government departments have a crush on you. There are some problems in the implementation of major special procedures for CNC machine tools. I will pay attention to this issue in the next step. In the future, the Ministry of Industry and Information Technology will rely on the association to carry out its work and do a good job in the implementation of major national special projects. After a thorough day of work, the meeting completed the scheduled agenda and closed the day. (Correspondent Li Li)
More Products
Shanxi Skysea Pump Lndustry Co.,Ltd. , https://www.skyseatianhai.com