To solve the problem of bathroom tiles falling off

The bathroom floor and wall tiles fall off. This is annoying. There are many reasons for the loss of bathroom tiles, which may be the cause of the ground layer, the cause of cement, the cause of construction, or the reason for waterproofing. So how to prevent the bathroom tiles off the phenomenon, let us follow Xiao Bian to understand what the bathroom tiles off what solution.

1, the bathroom tile paving the ground flat

Laying non-cemented floor tiles on the ground, knocking them out, spreading the grout over the floor tiles, and laying them on the ground, with the four bricks flush in the diagonal position. The laying of the order is also stress. Posted floor tiles should be posted from the inside, such as the ground slope or floor drain, should pay attention to find the slope by the drainage direction; wall tiles should be laid up from the bottom, for the sake of beauty, the bottom of the brick should be posted. After pressing the tiles, press the tiles. In addition, a wall cannot be attached to the top at a time to prevent the tile from being heavy and causing it to fall. Do not step on tiles for a short period of time.

2, before the bathroom tile paving more water

In the summer, because the material is drier than ordinary, so for the tiles, tiles and other materials that need to be treated with swelled water, the treatment time of the swelled water should be prolonged to bring the moisture to saturation. In this way, the phenomenon of water absorption from the cement due to the drying of the tiles due to the drying of the tiles will not occur, and the cement will not be firmly bonded to the tiles, causing hollowing and falling off, and will bring you some unnecessary troubles.

3, bathroom wall tiles to be fully flooded

Because wall tiles have a high moisture content, this feature must be taken into account when pasting. Before the tiling, the base layer should be fully watered and wet; otherwise, the moisture in the mortar will be rapidly absorbed by the dried base and tiles and quickly condense, which will affect its adhesive fastness. Otherwise, the tiles will absorb moisture from the cement so that the cement cannot function as an adhesive.

4, clean up the base level before tiling

If the wall has lime plaster, latex paint, wallpaper and other decorative objects, or dirt on the ground, be sure to clean, otherwise the cement mortar and the base layer bond is not strong; In addition, if the wall itself has cracks, it should be done properly After treatment, tiles can be used to prevent cracking or detachment of the wall tiles caused by cracks in the basic structure in the future. Also, for the ground and wall surfaces where the flatness or verticality gap is too large, cement mortar should be used for leveling treatment. The difference in the color of the tiles is also compared before the shop.

The above Xiao Bian gave us how to prevent how to prevent the bathroom tiles from falling off: When the bathroom tiles are paved, the floor is paved and the bathroom tile is covered with water before soaking. The bathroom wall tiles should be fully submerged and the base level should be cleaned before the tiles are laid. The bathroom should be well guarded before laying tiles and avoid inconveniencing future life.