In order to ensure that the lower gas pipeline is not blocked, it is necessary to prohibit the operation of the furnace empty layer (a large amount of dust will be emitted when the empty layer is operated and coal is added, and the gas will be carried along with the upper gas), and the full material layer operation is guaranteed at all times, thereby reducing the dust in the upper gas. Content. The top of the furnace shall be equipped with a coal separator and a coal level detector to detect the coal level online at any time and ensure the full material layer operation. The coal separator ensures that the coal material is evenly distributed in the furnace, and sufficient coal adding space is ensured. The coal level detector is very important for guaranteeing that the furnace is fully loaded with the material layer. The coal level detector can check the coal level at any time whether it is full or not, depending on whether the coal level is full or not, it automatically orders the coal adding machine to add coal. The operation of the full charge layer of the furnace is the key to ensure that the upper section of gas is less likely to carry dust, because each time the coal layer is operated to add coal to the furnace, the added coal is guaranteed to be within the coal holding space of the coal separator. With the ash removal operation, the coal material in the furnace slowly moves downward. At this time, the coal level detector detects the lack of coal in the coal separator, and part of the coal in the coal space of the coal separator slowly moves down to the furnace, thus instructing coal addition. The coal is added to the machine. In this way, dust caused by adding coal will stay in the coal-reservoir space, and after settling down, it will slowly move down to the furnace with the coal and will not be carried out with the gas from the upper section. The content is small, and the tar fluidity is very good, so as to effectively prevent the blockage of the upper gas pipeline. Website: Phone
Trojan`s new LCD touch screen programmable vacuum system for epoxy cold mounting, offers excellent pore impregnation in a compact format. This equipment can make epoxy resin penetrate into any porous samples quickly and effectively, resulting in ensured the edge protection of the sample. This equipment is light and compact, external connecting the compressed air source can quickly and effectively pulls a vacuum, and can also be connected to vacuum air pump.
Vacuum Mounting Machine,Atm Hot Mounting Press,Atm Metallography Mounting,Mounting Press For Metallographic Samples
TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterials.com