After the floor tiles are laid, the water is sprinkled against loosening, which is both symmetrical and enhanced.

Recently, the south section of the rich road is changing the floor tiles on the sidewalk. Ms. Liu saw a special person sprinkling water on the paved road. Is it sprinkling water and dust, so why are some floor tiles not sprinkled?

The reporter came to the rich road and saw that the workers were busy with the construction. Some people used the iron to pick up the old floor tiles, and some were busy laying new floor tiles.

On the paved road, a middle-aged man picked up a watering can and sprinkled water on the road. The newly paved floor was not ash. Why did he sprinkle water? The reporter went to the front to find out that the water was sprayed to prevent the tiles from loosening.

The master explained that before laying the floor tiles, spread a layer of mortar mixed with sand and sand on the ground, and then lay a piece of floor tiles. Sprinkle water on it, and the water penetrates into the damp mortar through the brick joint. On the one hand, it settles well and on the other hand, it strengthens the viscosity.

Why do some pavement tiles have not been loosened when they are laid, but after the rain, the tiles begin to loosen, pedestrians walk on them, the tiles will be like seesaws, and the sewage will not be able to Splash on the shoes of pedestrians.

The master said that this phenomenon is that the construction workers cut corners, some use only yellow sand as a bedding layer, there is no cement at all, it is impossible to play a sticky joint, and some of the ratio of yellow sand to cement is not up to standard, too little cement It is. In addition, after the floor tiles were laid, there was no water sprinkling on them, and the underlying cushion was not real, and the rain would be loose.

PAR56 LED Pool Light

LEDER technology`s PAR56 LED pool light makes your Swimming Pool Colorful. Multiple colors and multiple combination colors. 7 static modes, 5 dynamic modes, 10-speed levels for 5 dynamic modes. You can choose any model you prefer by remote control, this Led pool spotlight made your life more colorful.The superior design allows for uniform light intensity and color while avoiding hot spots and glare.

We adopted high-grade stainless steel and excellent silica gel blue circle as a lamp body of the LED pool light, with an excellent waterproof sealing material, so quality is absolutely guaranteed.We also make sure the light from this RGB LED swimming pool light more uniform and bright. Used for both Fresh or saltwater pool.

Features:

• Excellent design

• Ecological protection

• Light intensity suitable

• Energy saving save electricity

• Quality guarantee

• Color temperature :3000k-6000K

• Adjustable angle: Rotating lens up to 130 degrees that allows for light distribution in the direction that best suits your space.

• Type of protection: IP20 /IP65 (Some models)

• Warranty:3 - 5 years

LED pool light is a new type of energy-saving and Landscape lights, which have been rapidly developed due to their power-saving and long life characteristics. Our LED underwater lights are widely used in lighting, pool-oriented lighting, green landscape lighting and some outdoor Fountain lighting.

We have rich production experience in lighting .Except Indoor Lighting product, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED street Light , LED Inground Light, LED Spike Light & LED Bollard Light as so on .


Pool Light, LED Pool Light, LED Swimming Pool Light,PAR56 LED Pool Light

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.ledsteplight.com