Five Centrifugal Pump Storage Centrifugal pump custody ①Not installed pump unpainted surface should be coated with a layer of suitable anti-rust agent, oil lubricated bearings should be filled with the appropriate oil, grease-lubricated bearings should be Only fill one type of grease, do not use mixed grease. Centrifugal pump storage (2) pump fluid, flushing, aspirating lines, discharge lines, pump housings and impellers for a short period of time, flushing flushing liquid in the pump casing, suction line and discharge line side by side. Centrifugal pump storage ③ clean bearing oil box, then add clean oil, thoroughly clean the grease and then fill the new grease. Centrifugal pump storage ④ The suction port and exhaust port sealed up, the pump is stored in a clean, dry place, to protect the motor windings from damp, with anti-rust liquid and anti-erosion liquid spray inside the pump. Centrifugal pump storage ⑤ Rotation of the pump shaft once a month to avoid freezing, and lubrication of bearings.
Weld Nuts are made with a greater amount of material than other nuts so that the nut’s form is maintained after being welded to another object.Weld Nuts,Hex Weld Nuts,Projection Weld Nuts,Weld T Nuts, Spot Weld Nuts,Square Weld Nuts
Weld Nuts,Hex Weld Nuts,Projection Weld Nuts,Weld T Nuts,Spot Weld Nuts,Square Weld Nuts
Ningbo Brightfast Machinery Industry Trade Co.,Ltd , https://www.brightfastener.com