Autumn and winter are coming, many families will be heating and heating, but sometimes they will feel the coolness of the room. This may be because the doors and windows are not tightly sealed. The wind will be mixed with dust and will be drilled through the window to make the heated room. Not warm enough. Bonafontein suggested that in the autumn and winter to keep warm, you must do a good job of keeping the windows warm.
In autumn and winter, the indoor temperature is obviously higher than the outdoor temperature, and the window with poor sealing will lose the heat source inside the room to the outside, causing the heat to be lost. Therefore, the window sealing and the reduction of the window heat can effectively keep warm.
First, the reason for the window leakage
Generally, there are two main reasons for the window to be ventilated: one is that the sealing strip of the glass and the frame joint of the window is aged, and the dust is accumulated and worn during the long-term use, and the ability to block the sand is reduced. Another possibility is that the wall is loose and the seal between the window frame and the wall is reduced, causing the wind to get in through the crack.
Second, different windows leakage solutions
Different types of windows and different types of windows have different treatment methods.
1, the old double-layer window fills the sawdust
For double-decker old-fashioned windows, the best way to do this is to fill the window with the sawdust. The sawdust can solve the moisture in the window and block the strongest cold air at the bottom of the window. For the window slits of such windows, it can be sealed with kraft paper to ensure that the airtight temperature is extremely high.
2, plastic steel window plus layer plastic
The plastic steel window has been used for a long time, it is easy to see through the air, and the gap at the interface is too large to be bonded. The best way is to use a sponge to stick around the window, then cover the entire window with plastic. The plastic is heat-absorbing and airtight, and the temperature is very good.
3, window frame wall gap filling foam
If there is a gap between the window frame and the wall, clean the gap, fill it with styrofoam, then fill the gap with the high-grade cement river sand, and finally make the finish repair; the air leakage between the window sash and the window frame can be considered. Plus sealing strips, felt strips, etc.
The number of layers of glass affects the use of the replacement of window glass is more real
Some old houses use single-layer glass, and the sound insulation and heat insulation effects are relatively poor. Therefore, many consumers choose to change the glass and increase the number of glass layers to solve the problem of indoor warming.
First, increase the number of glass layers
Adding the number of glass layers on the original basis, changing the original single-layer glass into double-layer glass, it is possible that the glass model material specifications are different, or the glass is added, and the window weight is also increased, resulting in the use process. The window is difficult to push open. For this situation, consumers should choose better windows or add a layer of windows.
Second, the construction method
The procedure for replacing a window is basically the same as adding a window, including on-site measurement and worker processing. Just when you go to the site to install, you need to remove the old windows when replacing the windows, and the number of layers is directly installed. The whole process takes 7-10 days, and measurement and disassembly can be completed in one day.
If the window is open to the outside, a window can be added to the room, and the window can be opened to the inside, and a sliding window can be added on the outside. Plastic material or broken aluminum can be selected for the window material.
Third, acceptance skills
The windows that have just been made must be carefully checked, especially for the case of adding windows. On the one hand, the thickness and safety signs of the glass should be confirmed, including the 3C certification mark; on the other hand, the hardware of the window should be carefully examined, and the opening and closing sash should be tried. Whether it is flexible, whether it is tight or not when closing the window.
Replace the thick curtain to help keep warm. The accessories also have warmth function.
Compared with households with more serious aging windows, the above two are more convenient and practical, and some families who are not serious in running winds can choose a thick curtain to solve the problem of keeping warm.
First, replace the thick curtains
The curtains in autumn and winter should have the effect of adjusting the light, and also have the effect of blocking the wind. Of course, the choice of the color, size, texture and color of the curtain should also conform to the style, decoration and style of the room.
Second, the choice of curtains
The choice of winter curtain fabrics, while demanding heavy and warm, also depends on the orientation of the fabric. The south-facing windows are sunny and there are many options in winter. The north-facing rooms are often cold and dark. The colors chosen in winter are mainly dark and warm, and the materials can be made of warmer materials such as cotton or flannel. Achieve the effect of blocking the wind and keeping warm.
Third, the accompanying supplies
In addition to the curtains, to increase the warmth of a room, you can also change on other soft furnishings in the room. For example, pillows, cushions, or lamps with similar colors or materials as curtain fabrics, and light sources that are more soft, and warm colors are used to make the room more warm.
I have already felt the coolness of autumn in the beginning of the day, so the winter will not be too far away. The suggestion of the good-selling network may be to take advantage of the autumn and improve the home decoration. This winter is warm winter.
Galvanized wire is divided into hot dipped galvanized wire and cold galvanized wire (Electro Galvanized Wire). Galvanized wire has good toughness and flexibility, the maximum amount of zinc can reach 350 g /sqm. With zinc coating thickness, corrosion resistance and other characteristics.
Galvanized Wire,Steel Iron Wire,Galvanised Mesh,Electro Galvanized Welded
Shenzhou City Hongda Hardware Products Co.,Ltd , https://www.galvanziedwire.com