The fastening screws made by Specialty Fasteners & Components (SFC) comply with the new Machinery Directive and prevent important fasteners from being lost when the mechanical safety cover and panel are removed. According to the company, the screws range in size from M2.5 to M10 (or equivalent in inch sizes) and can be held on the panel by snapping, press-fitting or threaded washers, as well as offering new fasteners. The flexibility of the installation. Tightening screws minimize downtime due to missing components and can be replaced if the threads are damaged during use. There are many different standard products to choose from, and SFC can also offer tailor-made designs to meet most application needs. The company also suggested important advice when tightening the screws, that is, remember to leave enough space for the threads to be free from touching the nut, otherwise the screws may drill through the countersunk holes in the nuts or on the panel. This effect can be achieved with the foot.
LED Sensor Batten Lights has options of microwave sensor and infrared sensor. There are two sensing modes. One is 0-10v dimming, and the other is on/off.
The main difference between these two modes is that the 0-10v dimming mode can set the brightness of the light after the person walks, and the pending time of this brightness can also be set. On/off mode, you can only set the time for the lights to turn off after a person walks, but not the brightness (that is, functions 3, 4 cannot be implemented). The 0-10v dimming mode is more intelligent.
Briefly introduce the function of sensor light:
1. Set up daylight threshold: If the ambient light is higher than the set brightness, the sensing function will not be triggered.
2. Set up the hold time: The time for the light to maintain brightness after the person walks away.
3. Set up a stand-by dim level: set the brightness maintained after the person walks
4. Set up stand-by time: After the person walks, the time to maintain low brightness
5. Set up detection area: Set the detection area.
Toggle button can set the remote distance of remote control and sensor.
If you need sensor lights in factories or warehouses, corridors, or other indoors, you can choose this LED Sensor batten lights. If you need IP66 sensor light, you can choose Sensor Waterproof Light.
Motion Sensor Led Light,Sensor Led Light,Motion Sensor with Led Light,Led Light Motion Sensor
SHENZHEN LITEHOME OPTOELECTRONIC TECHNOLOGY CO., LTD. , https://www.litehomelight.com