1. Introduction to products
With the characteristics of high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | Other |
| Max0.06 | Max 0.025 | Max 0.025 | Max 0.70 | Max 1.0 | 23.0~26.0 | Max 0.60 | 4.5~6.5 | Bal. | - |
Resistance heating elements; Material in metallurgy; Household appliances; Mechanical manufacturing and other industries.
3. Packing detail
Spool, coil, wooden case(as per client's requiryment)
4. Properties
Grade: 0Cr25Al5
Chemical Composition: Cr 23.0-26.0% Al 4.5-6.5% Fe Balance
Max. Continuous service temp. Of element(° C): 1250degrees
Resistivity at 20. C(μ Ω @m): 1.42+-0.06 ohm mm2/m Fecral 0cr25al5 Heating  Alloy Material Fecral Strip
1. Introduction to products
With the characteristics of high resistance, low coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, it is widely used in industrial electric furnace, household electrical appliance and far infrared ray device.
| C | P | S | Mn | Si | Cr | Ni | Al | Fe | Other |
| Max0.06 | Max 0.025 | Max 0.025 | Max 0.70 | Max 1.0 | 23.0~26.0 | Max 0.60 | 4.5~6.5 | Bal. | - |
Resistance heating elements; Material in metallurgy; Household appliances; Mechanical manufacturing and other industries.
3. Packing detail
Spool, coil, wooden case(as per client's requiryment)
4. Properties
Grade: 0Cr25Al5
Chemical Composition: Cr 23.0-26.0% Al 4.5-6.5% Fe Balance
Max. Continuous service temp. Of element(° C): 1250degrees
Resistivity at 20. C(μ Ω @m): 1.42+-0.06 ohm mm2/m
In granite mines, only injection-molded and rubber-injected diamond beaded ropes with or without springs can be used. Diamond beads can be sintered or electroplated, but sintered is mainly used. Generally, there are 32-40 diamond beads per meter. It is suitable for secondary cutting at the initial stage of mining and any angle, but not for block shaping. The largest cutting side reaches 20-500㎡, rarely 300-450㎡, the average production capacity is 1.5㎡/hour-8㎡/hour, the life of diamond beaded rope is 2.5㎡/meter-12㎡/meter on average, diamond The linear speed of the beaded rope is 16-26m/s.
Diamond Wire Saw For Granite,Granite Cutting Saw,Wire Saw For Granite Cutting,Wire Saw For Granite Quarry
Jiangyin Baoneng Precision New Material Co.,LTD , https://www.baonengwire.com