Gear pump common fault and maintenance methods

Gear pump common fault and maintenance methods: (1) Symptom: the pump can not discharge Fault causes: a, the opposite direction of rotation; b, suction or discharge valve is closed; c, the inlet without material or pressure is too low; d, viscosity too High, the pump can not bite countermeasures: a, confirm the direction of rotation; b, confirm the valve is closed; c, check the valve and pressure gauge; d, check the liquid viscosity, low speed operation by the speed ratio of the flow rate is there, , Then the inflow is insufficient. (2) Symptoms: abnormal sound failure reasons: a, coupling eccentric or poor lubrication b, motor failure; c, reducer abnormalities; d, shaft seal at the installation of bad; e, shaft deformation or wear countermeasures: a, Check or fill the grease; b, check the motor; c, check the bearings and gears; d, check the shaft seal; e, parking disintegration inspection (3) Symptom: pump flow failure Cause: a, suction or discharge valve is closed; b, the inlet pressure is low; c, the outlet pipe plugging; d, packing box leak; e, speed is too low countermeasures: a, confirm the valve is closed; b, check the valve is open; c, confirm the discharge volume is normal; Solid; a large number of leaks affect the production, should stop running, disassembly inspection; e, check the actual shaft speed; (4) symptoms: current over the cause of the fault: a, the outlet pressure is too high; ; c, shaft seal assembly bad; d, shaft or bearing wear; e, motor failure measures: a, check the downstream equipment and pipelines; b, viscosity test; c, check the shaft seal, appropriate adjustments; d, Handcart car is too heavy; e, check the motor (5) Symptom: pump suddenly stopped Fault causes: a, power outage; b, motor overload protection; c, coupling damage; d, The mouth pressure is too high, interlocking reaction; e, abnormal bite into the pump; f, shaft and bearing adhesion stuck measures: a, check the power; b, check the motor; c, open the safety cover, disk inspection; d, check Instrument interlocking system; e, after parking, reversing confirmation; c, disc confirmation

3m Tape Measure

The main type of Tape Measure is Steel Tape, followed by fiber tape, which is the tape that everyone often sees. Many people say it is a cloth ruler, and there is also a waist measurement ruler (tailor ruler/clothing ruler belong to this category). In southern China and Hong Kong, the tape measure is usually referred to as a soft ruler or a pull ruler. The material is PVC plastic and glass fiber, which can prevent the tape from being stretched during use.

3M Tape Measure,Vintage Tape Measure,Cheap Tape Measure,Durable Steel Measuring Tape

Henan Liangjin Tools Co.,Ltd , https://www.jtapemeasure.com