Many owners complain that the color of the paint on their walls is not uniform, uneven or there are traces of touch up paint. This is probably due to the carelessness of the master decorator in the painting process on the wall. It is best for owners to first understand what steps are needed for the entire painting process. What do you need to pay attention to? If you know what to do, you can prevent it as soon as possible.
Steps and details can not be ignored
Paint can be divided into 6 steps:
The first is preparation. The door, window frame, furniture and paint connection, paste color paper protection. Well-made wooden cabinets, partitions and other furniture should be sealed with newspapers so as not to be soiled by paint.
The second is color adjustment. For walls that require color, the area should be accurately calculated in advance and the materials used should be evenly distributed. Then the primer is applied to prevent the wall surface from being wet and the color of the top coat is uniform. This prevents the appearance of water stains on the boards.
The third is roller coating construction. The order of topcoat construction: ceiling, lines, and back wall. Paint on the wall at least two times, the first time the paint can be added 5% to 10% of the water, to facilitate the absorption of the wall, the second time the paint can not add water, with the first pass of the coating there is a certain interval. Roller coating requires the use of two roller brushes at the same time. The coarse roller brush is followed by the roller brush. Use a thick roller to evenly paint the paint on the wall. Use a fine roller to brush over the rough roller. Brush it again to make the wall paint delicate and brush out the desired pattern. Pay attention to the roller coating, do not adhere too much paint on the roller, the rolling pressure should be uniform and the speed should be moderate.
The fourth is brush construction. Use a brush to make up the paint on the edges of the wall and corner of the brush.
The fifth is polishing the wall. When the paint on the wall is dry, sand the wall with sandpaper to reduce the brush marks on the wall and make the wall more smooth. When polishing, be careful to feel the smoothness of the wall from time to time in order to judge where to polish. It should be noted that when sanding, try to use finer sandpaper. Generally, the softer putty is used with No. 400~500 sandpaper, and the harder texture is No. 360~400. After thoroughly polishing, thoroughly clean the wall.
Sixth, cleaning and inspection. Clean the paint marks on the foot line and other places, check whether the color of the wall meets the design requirements, and whether the color of the brushing surface is the same, so as to prevent the bottom, the brush, the powder, the bubbling, the bite color and the flow drop. And other quality defects.
Wall paint tips:
1, the primer should be uniform: when brushing the primer must ensure uniform, to ensure that every corner of the wall are brushed, if the wall of the paint is relatively large, add some water, to ensure that even brushing .
2, find repair: Putty finish after the completion of the general will have some flaws, generally will not be found, but after brushing paint will be very obvious, this time need to find repair work, to ensure that the paint used consistent, can not appear Chromatic aberration.
3, topcoat: be careful not to over add water, this will affect the film thickness, feel and hardness, etc., to choose some better tools, so that the brush out of the paint feel more delicate.
4. Maintenance: The general latex paint will dry after 4 hours of brushing, but this time the hardness is still not enough, and care should be avoided at this time. It is recommended that you avoid touching the wall within 7-10 days after brushing the paint. .
The above is the information about how to prevent the non-uniform unevenness of the paint on the wall. It is hoped to help everyone. We are painting the wall paint. It is often found after the fact that the color of the paint is uneven, especially its own DIY. This time, it is discovered and late, unless it is re-brushed. Therefore, in order to prevent the emergence of such problems, we must do a good job in advance prevention work! For more information, please follow this site!
Decoration Experience Three Trees Paint Furniture Paint Window
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Grow Light On Herb,Herb For Grow Lights,Herb For Led Grow Lights,Best Herb For Grow Lights
Feton Corporation , https://www.ultraplantleds.com