RY-type air-cooled high-temperature heat-conducting oil pump, also known as heat-conducting oil pump, high-temperature heat-conducting oil pump, heat-conducting oil circulating pump, its structure and performance make it widely used in different industries and promotion, to withstand high temperatures, Good sealing performance is a significant leap in the technology of the oil pump industry. RY-type high-temperature heat-conducting oil pump for oil and chemical industry, oil industry, synthetic fiber industry, textile printing and dyeing industry, plastics and rubber industry, paper industry, timber industry, construction industry and other industries, In addition, RY- , Food industry, pharmaceutical production, hot oil furnace oil circulation system, hot oil heating cycle system widely used. But how to correctly use the heat transfer oil pump to make it more efficient? Here we do a few can analyze and refer to: Accurate use of hot oil pump: First of all, after the heat pump and pipe installation, whether it is using water pressure, pressure, heat pump inlet and outlet valves must be closed before pressure test , To prevent damage to seals, resulting in oil spills. Boot preparation (1) clean up the site, unscrew the bearing screws, add thermal oil as lubricant (2) should be used before the boot of the thermal conductivity of the oil pump filled with heat pump to get rid of heat transfer oil pump air outlet Of the pipeline gate valve should be closed. (3) The delivery of the HTF before driving average heating, preheating is the use of the heat transfer oil is continuously passed through the pump body. Pre-heating scale: heat pump oil pump casing temperature not less than Imported oil temperature 40 ℃, preheat rate 50 ℃ / hour, the boot nut on the side nut should be loose 0.3-0.5 mm, warm-up should be tightened. (4) Hand-moving coupling Pump should be flexible.
Open End Blind Rivets,Open End Rivets,Open End Rivet Nut,Blind Rivets Open
KD METALS (JINGJIANG) CO.,LTD , https://www.toprivet.com