A. The fuel tank cap air valve and steam valve are blocked;
B. The fuel filter is clogged;
C. Gasoline pump damage: 1. Inlet and outlet valve failure, 2. Diaphragm rupture, 3. Excessive clearance between outer rocker arm and inner rocker arm
D. The oil circuit system has air leakage, oil leakage, and the oil pipe is concave or blocked;
E. There is water in the tubing;
F. Have air resistance;
G. The carburetor inlet or filter is blocked;
H. The carburetor oil passage is blocked or the oil inlet needle is stuck.
Solution:
A. Check if the tubing is cracked, if it is loose, if the tubing joint is loose or if the oil pump leaks oil;
B. Remove the carburetor connection tubing. Use the starter or hand crank to turn the engine to see if oil is ejected from the tubing. If not, the fuel tank and the gas pump are faulty. If so, the carburetor is faulty.
C. Remove the oil inlet pipe joint connected to the gasoline pump, and suck the oil with the mouth. If it can't be sucked out or it is very laborious, there is a problem with the fuel tank and the gasoline filter; Botou Taibang Pump Valve Manufacturing Co., Ltd.
D. The oil inlet pipe joint connected to the gasoline filter is removed, and the heavy oil coal tar pump sucks the oil with the mouth. If the suction is not strong or laborious, the fuel tank, the fuel tank cap and the oil outlet pipe have problems;
E. According to the inspection method of AD, it is inspected from the front to the back, and is excluded from the back to the front;
F. At present, in summer, the temperature is higher, and the gas generated by the evaporation of gasoline in the oil circuit will cause a certain oil supply in the oil pipe to fail to catch up. At this time, as long as the parking is closed, the gas resistance disappears after cooling, or the oil pipe can be loosened to release the gas. ;
G. If it is caused by the cause G, H or the main hole in the float chamber and each nozzle hole, it is enough to spray with the carburetor cleaner.
The above are the common reasons and solutions for the lack of acceleration, oil supply can not keep up, I hope to help you.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
What is Oil Seal, a component of machine that seals lubricants, an oil seal is constructed of rubber,garter spring, and an internal case. While preventing the leakage of lubricants,water,or chemicals,an oil seal also prevents the entry of dust and dirt into a machine.
Oil seal also called as dynamic seal is use to prevent leakage of fluid between two components having relative rotary or sliding motion.
Skeleton oil seal is normal for a variety of mechanical bearing, especially the rolling shaft parts, to guarantee the normal work of the bearing and other pure rotational parts. its function is to put the oil cavity and the outside world, photosensitive oil sealing, sealing outside and dust.
U shaped coil is commonly used in the hydraulic cylinder seal, it is a kind of typical lip seals, whether for piston rod, can obtain good effect. Polyurethane u shaped coil is mainly used in hydraulic cylinder, it has good mechanical properties, good oil resistance, is the most commonly used in hydraulic oil cylinder, high sealing material.
Oil Seals type nomarl use TC, TB, HTCL, VC, DC, HTBR, KB, KC, SB, SC, TA, TBC, USH, LBH, UPH, ODU, IDU, WAI, DHS, UHS, UNS, UN, YX, Yx, J, JA -
The type and features of the various rubber materials used in oil seals, such as PU, TPU, CPU, NBR, HNBR, ACM, VMQ, FKM, PTFE, Fabric and so on.
Oil Seal
Oil Seal,Ptfe Oil Seal,Auto Oil Seal,Truck Oil Seal
Zhejiang Dream Industry Limited , https://www.mlwdream.com