Stone protection construction methods include: brushing, painting, rubbing, spraying, soaking, roller coating, pouring and so on.
Because of its own characteristics, stone needs people to do a good job of protection. Stone protection construction methods are: brush (with brush), coating (with sponge), rub (with cloth), spray (with low pressure spray gun), soaking (with soaking tank), roller coating (with roller), pouring ( Seven kinds of containers are used. During construction, the way of protective construction must be determined according to the type of stone finish and related protective agents.
(1) Spraying: This construction method is characterized by fast construction speed and uniform coating, especially suitable for the construction of mushroom surface stone. But the waste is big and the cost is high.
(2) Soaking: The main advantage of this construction method is that it can fully protect the inside and outside of the stone, and there is no problem of insufficient penetration like other methods. In all construction methods, only the immersion can achieve the best protection effect. However, because the stone is too inhaled by the protective agent, the cost is high. Therefore, it is required to use some curing agents that are of the highest quality and low in price.
(3) Roll coating, this method is suitable for large-area ground protection construction, and the loss is too large when used for wall surface. Generally used for the construction of lower cost curing agents.
(4) cloth rubbing, this construction process is used for the surface of lighter stone. We generally do not advocate this kind of construction method, but if the dosage during the construction of the cloth is enough to protect the stone, it is still a better construction method. .
(5) Sponge coating, this process is applied to the lighter surface of stone, and can be coated with a protective agent more evenly.
(6) pouring, this process is suitable for all kinds of stone surfaces, but the requirements for equipment and site are high.
(7) Brush brush, this process is suitable for various surfaces and can be controlled at will. It is a common construction method.
Among the above-mentioned construction methods, in addition to the second (2), the common disadvantage of the other six construction processes is that the inside of the stone cannot be effectively protected. Therefore, we promote the soaking of this construction process (for stone plants), this construction process can make up for some of the lack of protective agents.
Different stone protective agents have different construction requirements. Before construction, a practical and feasible construction plan should be formulated according to the instructions for use of the protective agent used and the actual situation on site. In addition, the quality of the stone protection has a great relationship with the quality of the protective agent, the construction process and the quality of the construction personnel. Therefore, it is best to consult a professional stone maintenance company or to handle it during the construction, so that the quality of the protection can be guaranteed.
Two Stage Oil Lubricated Vacuum Pumps
Rotary Vane Vacuum Pump,Small Vacuum Pump,Yellow Jacket Vacuum Pump,Scroll Pump
Dongguan Beqile Mechanical&Electrical Equipment CO.,LTD , https://www.betemvacuum.com