The reason why the headset has a murmur

When we use computer headsets, we often encounter noises and rustling sounds. Try to change the headphones with noise to two computers to confirm whether it is a problem with the headphones itself or a computer problem.

1, the computer did not clean up in time, the accumulation of system garbage is too much, the computer reflects slowly, should promptly clean the computer system garbage and anti-virus.

2, the headset is damaged, you can compare the headset with other headsets or computers, if necessary, change the headset.

3, the computer has static electricity, which is also the main reason. You touch the iron part of the computer case with your hand. If the current sound disappears, you put a piece of copper wire, one end is connected to the screw on the back of the computer, and one end is grounded. The effect is excellent.

4. Is your microphone in a strengthened state?

Solution: Remove the microphone. Because some sound cards are not supported.

5, see if there is anything with a magnetic field and sound waves around you.

Solution: Remove the electrical equipment with magnetic field (such as mobile phone, fan).

6, you only have a voice when you are connected to a friend, it is normal in the chat hall.

Solution: Please note that either of you has turned on the inside or turned on the speaker. If there is, please turn it off. (Because the speaker must be placed in the speaker, do not face the microphone). In addition, one side of the firewall is set too high (including LAN users, Internet cafe users), and some broadband users (such as Telecom and China Netcom) will have some voice problems.

7, Mike does not open the sound when the sound is very small, open the reinforcement will have a large current noise. Noisy noisy.