What is called the centrifugal pump gas tied phenomenon

When there is air in the centrifugal pump housing, there is less centrifugal force due to the density of the air being much less than the density of the liquid. Thus, the tank above the liquid level and the pump inlet pressure difference is not enough to liquid storage tank pressure into the pump, that is, centrifugal pump without self-suction capacity, so that the centrifugal pump can not deliver liquid, a phenomenon called "gas tied phenomenon". In order to fill the centrifugal pump with a liquid, a bottom valve with a strainer is usually provided at the bottom of the suction pipe. The bottom valve is a check valve. The filter serves to prevent the solid matter from entering the pump to damage the impeller or impede the normal operation of the pump.

LPG Mass Flow Meter

Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of LPG Mass Flow Meter, LPG Mass Flowmeter, LPG Flow Meter, LPG Flowmeter, LPG meter, ATEX, IECEx & CE approved.

Sealand have DN03 to DN150 size meters and are developing bigger models. Each meter can be connected with your computer through a USB-to-RS485 converter. The detail steps are as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.

LPG Mass Flow Meter, LPG Mass Flowmeter, LPG Flow Meter, LPG Flowmeter, LPG meter

Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com