For the decoration of the living room, glass is an extremely popular material. It appears that the living room is very transparent and at the same time does not hinder the entry of light. Therefore, it has become a more popular product at present, but in order to block the excessive sunlight from entering, large Some users will put a film on the glass. In fact, the glass film can not only keep the effect of heat preservation and ultraviolet protection, but also protect the privacy. So how do you paste the glass film ? Let's take a look with the editor.
How to paste the glass film
1. Cut according to the glass size
Generally speaking, the size of the film bought from the store is not very consistent with the size of the glass at home, and it is necessary to cut it at this time. It is recommended that you should cut out about 1 cm in size for later trimming. Adjustment.
2. Water spray
Before the operation, clean the glass first, remove dust and oil stains with a damp cloth, then use a watering can to spray enough water on the glass, spray as much as possible, as long as it can flow down, this is the entire glass sunscreen The most important step in the hot film pasting process will bring a lot of convenience to the pasting of the next film.
3. Paste heat insulation film
Before pasting, you need to tear off the release film behind it, and then stick the film on the glass, preferably from the top to the bottom. If there is no one-time alignment, you can peel it off and paste it repeatedly.
4. Eliminate bubbles
After the whole film is finished, you need to use a card or scraper to scrape the blisters from the center to the four sides. At the same time, you can also scrape the sprayed water out until there are no bubbles at all. It is recommended that you can use a needle to puncture it, and then scrape it flat, without affecting the appearance.
What is the role of glass film
1. Reduce heat, reduce glare and increase comfort
For today's buildings, for the sake of aesthetics, the application of open and large-area glass has been a common decoration method, and the architectural membrane is a product directly installed on the inner surface of the window glass, which helps to correct the lighting The uneven temperature in the strong area or the back sun area, and disperse the glare and uncomfortable glare, make the indoor staff more comfortable and more efficient.
2. Heat insulation and energy saving, reduce heating and cooling costs
In the cold winter, the heat in the house will always be lost through the window, which not only makes people indoors uncomfortable, but also increases unnecessary energy consumption costs, and installs a low-radiation solar control film on the ordinary single-layer glass The inner surface can reduce heat loss by up to 30%.
Summary: Well, the above is about the introduction of how to paste the glass film. I hope to provide you with some help. I believe that in the future process of how to paste the glass film , friends will be more handy and create their own satisfactory results.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Night Light,Led Bulb Light,Colorful Night Light,Led Cabinet Light
NINGBO ZHENGUO INTELLINGENT LIGHTING CO.,LTD , https://www.intellingentlighting.com