Xingsuo children's furniture reminds: parents should pay attention to the safety details of children 's furniture that are most easily overlooked by parents!
When it comes to the hidden dangers of children's furniture, most parents first think of formaldehyde. In fact, children's furniture is not a reduced version of adult furniture. Children's homes have their own safety standards.
The hidden dangers caused by unqualified children's furniture are far more than formaldehyde. The probability of occurrence of dangerous events such as bumps, smashes, and suffocation is much higher than that of formaldehyde. The following are the safety details of children's furniture that parents can't ignore for everyone to check and eliminate hidden dangers.
Reminder for Xingxing children's furniture : 1. Sharp edges and dangerous sharp points and protrusions must be protected
Without the necessary protective measures, children's furniture may also become a "weapon" for hurting children. According to the "Child Injury Prevention Advocacy Report" released by the Chinese Center for Disease Control and Prevention and the Global Child Safety Organization in 2012, one of the main sources of injury for children aged 3 to 6 years is the sharp corners of furniture such as wardrobes. The staff of the well-known children's furniture brand Colorful Life stated that the "General Technical Conditions for Children's Furniture" clearly stipulates that qualified children's furniture products should not have dangerous sharp edges and sharp points, and edges and edges should be rounded or chamfered. The product can reach the dangerous outer corner (circled in the figure below) at a position below 1600mm from the ground, and the rounding radius should not be less than 10mm, or the rounding arc length should not be less than 15mm. The product should not have dangerous protrusions. If there are dangerous protrusions, they should be protected in a suitable way. If parents have purchased furniture with sharp edges and corners, they can purchase protective rubber strips for edge protection.
Picture from "General Technical Conditions for Children's Furniture"
Xingxing cable children's furniture reminder: Second, the holes and gaps should be reasonable to avoid card injuries
Young children have low awareness of potential hazards. Due to the small gaps, children's fingers are caught in safety accidents from time to time. In order to prevent children's fingers from being caught in furniture holes and gaps when using furniture, "Children's Furniture General Technology The Standard requires that the rigid materials of children's furniture products have holes and gaps with a depth of more than 10mm. The diameter or gap should be less than 6mm or greater than or equal to 12mm; the gap between movable parts that the product can contact should be less than 5mm or greater than or equal to 12mm. The holes and gaps are unqualified. If a child inserts a finger by mistake, the finger cannot be pulled out. If the treatment is not timely and inappropriate, the child's finger will be difficult to preserve.
In addition, colorful life staff also said that in recent years, due to unqualified children's bed gaps, child casualties have also occurred from time to time, the State Administration of Market Supervision Defective Product Management Center, from 2018 to May 10, 2019, The Defective Product Management Center issued 18 recall notices for children ’s bed guardrails, involving the recall of 766,000 pieces of children ’s bed guardrails with potential safety hazards. The central issue is that there are holes between the guardrails and mattresses, adjacent guardrails that pinch children, Defects in openings and gaps; there is a risk of suffocation, a risk of pinching and a risk of falling.
Xingxingsuo children's furniture reminder: three, closed furniture must have vents
In order to prevent children from drilling into small spaces and playing, causing suffocation and other dangers, the "General Technical Standards for Children's Furniture" standard stipulates that in a certain area of ​​airtight closed space, one or two unobstructed vents should be provided to place the furniture on the floor When placed on any position and leaning against two vertical planes that intersect at a 90 ° angle in the corner of the room, the vents should be kept unobstructed. Covers, doors, and similar devices should not be equipped with automatic locking devices. Can be opened from the inside. The staff of Colorful Life reminded that parents must pay attention to the ventilation of each enclosed space when purchasing children's furniture. Since most of the children's furniture vents are on the back, they should also be kept between the wall and the vents during installation The gap can effectively prevent the tragic tragedies such as suffocation after the child enters by mistake.
Xingsuo children's furniture reminder: Fourth, cabinet products with a height greater than 60 cm must be fixed
Children like to climb the cabinet furniture, only to fix it can completely avoid the occurrence of tragedy. In order to prevent overturning, children's furniture must be connected and fixed to the wall. "General Technical Conditions for Children's Furniture" also clearly states that all high table and cabinet products with a height greater than 60 cm should provide connectors for fixing products on buildings, and clearly indicate the installation and use methods in the instructions. In addition, the regulations also require that the product should not use glass parts outside the area above the ground or the height of the child ’s standing surface above 160 cm. Colorful Life staff also recommends that parents do not place heavy objects that may fall Once dropped, it is easy to injure children.
The seemingly safe children's furniture has hidden risks everywhere. Many parents pay more attention to whether the material of children's furniture is solid wood or how much formaldehyde is contained, but important details such as sharp edges and vents are often overlooked. As the only brand participating in children's furniture standards, Colorful Life adheres to the "only children's standard" Make furniture ". Aiming at the safety details of children's furniture that parents can most easily overlook, "Care Care" and "Anxin Bao" have been established. From the prevention of suffocation and fall injury, there are up to 11 structural safety indicators, and up to 39 compulsory physical injuries and harmful substances. Sex testing projects, while ensuring the safety of children, set a new benchmark for the industry.
The above content is provided by Xingsuo Children's Furniture
Belleville Washer NFE 25-511 M
Serrated conical washers,Stainless Steel serrated conical washers,M8 Serrated conical washers,Zinc Plated Belleville washer automobile
Ningbo Yinzhou Zhenhua Stamping Co., Ltd. , https://www.fastenersstamping.com