Aluminum gussets come in many sizes, including the panel width, thickness, and height of the hem. The selection should be based on the characteristics of the bathroom at home. The aluminum gusset plate is divided into two types: punched and flat. The surface punching can be ventilated and sound-absorbing, and the inside of the gusset is covered with a film cushion. The moisture can be absorbed by the film through the punching hole, so it is most suitable for kitchens with more moisture. 600mm × 600mm microporous square plates, C150, C100 strips and 300×300, 300×600 aluminum gussets are the most widely used on the market.
The quality of the pink ceiling aluminum gusset is not thin or thin. The key lies in the texture of the aluminum. The general aluminum gusset plate is 0.8 mm or even thicker. Why? Because some engineering gussets are very long, in order to To prevent deformation, it is necessary to use a little thicker and harder. On the contrary, aluminum buckle plates for home decoration are rarely more than 4 meters, and there is no heavy object on the aluminum buckle ceiling. Therefore, the aluminum buckle plate can be said. 0.6mm is enough. So, why do you go to the building materials city, a lot of salesmen tell you about their 0.8mm, and friends say that someone introduced him to 0.88mm; it is often because their boards can't, so they can only use the thickness to be human- - It is really devastating.
Explicitly tell everyone that 0.6 mm is enough. Take the aluminum plate of an imported brand with a high reputation on the market as an example. Its price is more than 300 yuan per square meter, but what is its thickness? 0.5mm, not as good as 0.6mm! Why, the board is not good or bad. It lies in the thickness but in the substrate. In fact, if the aluminum gussets you consult are brand names, in the mid-range, most of them are 0.6 mm.
As for why some brands are 0.8 mm, they are not good. Some miscellaneous brands use cans of aluminum. Because of the quality problems of aluminum itself, they want to make the aluminum plate very thin, but it is impossible because The aluminum is not good, the board has no way to pull it evenly, so they can only do it in thick.
Therefore, in order to identify the aluminum gusset plate, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the board is uniform, and feel the elasticity and toughness by pinching the board with a hand.
Product introduction
The coal-based Net Gas Granular Activated Carbon with high quality anthracite as raw material, by block crushing production technology refined processing; the appearance is black particles. It has large pore specific surface area and specific volume, reasonable pore structure, good adsorption properties, high mechanical strength, good wear resistance, structural stability, small gas resistance, easy regeneration, low regeneration loss, low cost, not easy to break under high pressure and high temperature and other characteristics.
Application
1. The coal-based net gas Granular Activated Carbon is mainly used for the purification of poisonous gas, waste gas treatment, purification of industrial and domestic water.
2. The coal-based net gas granular Activated Carbon is also used to chemical raw materials, pharmaceutical chemical synthesis gas, industrial gas, carbon dioxide and hydrogen for beverage, nitrogen, chlorine, hydrogen chloride, ethylene hydrocarbons, ozone, ethane, butane, cracking gas, inert gas, coal gas, coke oven gas, natural gas, purification of sulfide in flue gas. Purification and exhaust in atomic facilities.
3. The coal-based net gas granular activated carbon is applied to cigarette filter, decoration, indoor air purification (remove formaldehyde, benzene and other harmful gas), new furniture, cabinets / drawers / refrigerator, can also be placed inside the shoes to deodorization.
4. The coal-based net gas granular activated carbon used for biochemical, paint industry, underground sites, leather factories, animal breeding sites for air purification and deodorization.
Process
Coal-based granular activated carbon with high quality anthracite as raw material, it produced by high temperature steam, and by carbonization, activation, crushing and sieving process.
Transportation and Packing
Woven bag, lined with plastic film bags, each 20kg can also be packaged according to customers demand, the product should be placed in a cool and dry place in storage.
When transportation, the product should prevent from mixing with hard material, prevent breakage, leakage or mixed with debris that affect the quality. Far away from water soaking, oil and fire.
Granular Net Gas Granular Activated Carbon
Granular Activated Carbon,Net Gas Granular Activated Carbon,200 Mesh Activated Carbon Filter,Activated Carbon Mesh
Ningxia XingKai Silicon Industry Co., Ltd. , http://www.xingkaisic.com