Floor tiles have a very important position in home decoration. Not only the bathroom (decoration effect map), the kitchen (decoration effect map), the balcony (decoration effect map), the floor is indispensable, and the entrance hall, the restaurant (renovation effect map), the living room (decoration effect map) often need to be decorated with floor tiles. . Therefore, the quality of the floor tiles and the quality of the inlay will directly affect the quality of the house, the overall appearance and the function of use. Then, what aspects should be paid attention to in the maintenance of floor tiles? The following three measures can be used for testing.
one look
There are many varieties of floor tiles
According to the variety and process, it can be divided into glazed brick, non-slip brick, vitrified brick, polished brick, micro-powder brick, permeable brick and other floor tiles. There are also many quality grades: excellent grades, qualified products, and other foreign products. Through careful observation, the quality of the floor tiles and the quality of the inlays are often “originalâ€: the surface of the floor tiles is uneven, the corners are not uniform, and the surface of the tiles is bright, but there are inclusions or glazes in the glaze or in the glaze. The color of the surface has a color difference, and it can generally be judged that the quality of the floor tile itself is poor, and it belongs to the inferior product that must be replaced. In addition, the quality of the slab decoration is mainly based on whether the flatness of the whole surface is more than 2 mm in the range of 2 meters long, whether the joint height between the brick and the brick is more than 0.5 mm, and whether the seam flatness exceeds 5 meters in length. 3 mm, where the above range is exceeded, the quality of the decoration is different.
Two knock
Check the floor tiles with empty drums
The inspection method usually uses a special small steel hammer or a small iron hammer and a small iron rod to gently smash the corners and the middle of the floor tile around the room to detect whether the floor tiles have empty drum sound. The sound is crisp, and the sound is normal for the sound of floating. It means that the quality of the decoration is not correct, and it is necessary to remove it in time. During the inspection, the empty floor tiles were marked, and the floor tiles were found to be broken and violent. The same room inspector told reporters that some decorating companies often mislead consumers with “a small amount of empty drums within the scope of quality agreementâ€, which is contrary to the regulations. The owner is reminded to pay attention to the rights.
Three splashes
Splash water test
Floor tile inlays also have a drainage slope requirement for balconies, bathrooms and kitchens. Check the floor of the bathroom, kitchen, and balcony for pits and shovel. If the water is smooth, you will know if you have a lot of water. This "process" can be put to the end. After all the other items have been tested, use water-filled utensils to put water on the floor and wait for a while. Where the water is accumulated, it indicates where the floor tiles are unevenly laid or the water is sloped. Not done enough.
Stereo Microscope ,Stereoscopic Microscope,Stereo Zoom Microscope,Stereo Microscope Magnification
Ningbo Beilun Kalinu Optoelectronic Technology Co.,Ltd , https://www.yxmicroscope.com