"Of the 61 batches of children's furniture products of 61 children's furniture companies that were sampled , 33 batches of products failed, including many well-known brands such as Quanyou and Duai." The fourth quarter of 2013 announced by the General Administration of Quality Supervision, Inspection and Quarantine Among the quality random inspection results of 8 products including children's furniture, the failure rate of children's furniture exceeds 50%, so people have to start to review the standards and safety of children's furniture.
Â
Among the unqualified products in the random inspection, 23 batches failed due to "edge and tip", accounting for nearly 70% of the batches that failed; 17 batches of "warning signs" failed. There is also a children's series swivel chair with the brand name "Hua Xiang Duo Duo" whose "formaldehyde emission from wooden products" is unqualified. It is the only batch with excessive formaldehyde.
Â
Â
"Corners" that are not valued by companies
Â
It is understood that the national standard for children's furniture GB 28007-2011 "General Technical Conditions for Children's Furniture" clearly stipulates the "edges and tips" of children's furniture: children's furniture should not have dangerous sharp edges and tips, and edges and edges should be round Or chamfering treatment, the product can reach the dangerous outer corner at a position below 1600mm (mm) above the ground should be rounded, and the radius of the round should not be less than 10mm, or the length of the arc should not be less than 15mm.
Â
In this spot check, unqualified edges and tips have become a prominent common problem. Unqualified brands also include Quanyou, Songbao Kingdom, Douai and other well-known children's furniture brands . "The main reason for the quality problems such as unqualified edges and cutting edges, and unqualified warning signs is that the company does not pay enough attention, because it is not difficult or impossible to achieve these from a technical or cost perspective. Obviously the cost has increased. Speaking of the importance that companies attach to the safety of standards and products, Sun Shudong, director of the Furniture Inspection Laboratory of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, said in an interview with this reporter.
Â
The structural safety of children's furniture is not only ignored in the production process, but also placed in an awkward position in the sales process. When selling children's beds, furniture merchants often seize the mentality of parents paying attention to safety and environmental protection. The sales staff always use materials as the focus of recommendation when selling children's furniture, and do not mention other details such as structural safety.
      In a children's furniture store of a well-known brand in the well-known Shilihe building materials market in Beijing, the sales staff was consulted about the quality and safety of children's furniture. "We are a professional brand for children's furniture, and we are currently in a leading position in the market, and many designs are completed abroad." The brand's complete set of children's furniture is displayed in the form of children's rooms. The furniture is mainly white. The products include multiple products such as beds, wardrobes, desks, etc. The entire set of furniture is soft in color. Compared with adult furniture, it is really childish, but the corners of the four sides of the samples such as bedside tables are not chamfered according to national standards. Handle, the sharp corners can easily hurt children.
Â
In another children's furniture sales store, it was found that the entire set of furniture uses very colorful colors and paints. Some children's furniture that can be stretched, lifted or folded, there are no warnings such as "Caution", "Warning", "Danger", etc. . The sales staff told reporters that the children's furniture sold at this counter was painted with environmentally friendly paint, which met the safety standards set by the state, but they also failed to provide a paint and wood quality test report.
Â
The material is the culprit of excessive formaldehyde
Â
In addition to the two "heavy disaster areas" of "corners and tips" and "warning signs", the problem of excessive formaldehyde, which has attracted the attention of the society, has not become the main cause of unqualified children's furniture this time. However, industry insiders reminded that this does not mean that formaldehyde does not need to be taken seriously.
Â
The main reason for the problem of excessive formaldehyde in furniture is the material problem. Relatively speaking, children's furniture has higher requirements for formaldehyde, which is equivalent to higher requirements for materials. The material and the production cost of the enterprise are directly related. A considerable part of the reason why the formaldehyde of the furniture exceeds the standard is that the enterprise chooses the inferior or substandard material due to cost considerations.
Â
Many parents do not know how to buy children's furniture , especially some young parents, they are more concerned about environmental issues such as whether formaldehyde exceeds the standard, and some safety issues are ignored. "Now the formaldehyde pollution is too severe. Buy furniture for children and want to buy some environmental protection." Ms. Cheng, who buys furniture for a 5-year-old son, said that when buying furniture, the sales staff will ask if they have an environmental certificate or smell the smell to judge . Regarding the safety of children's furniture, Ms. Cheng said that she would pay attention to whether the corners are rounded or not. As for the others, it is unclear.
Â
"I heard that children's furniture will implement new standards, and I will have a reference for buying furniture for my daughters in the future." Mr. Wang, who is planning to renovate the new house, said, "The standards are too professional. I don't understand much, nor do I know the furniture I chose Does it meet the new requirements? "Many respondents said that they did not understand the specific standards of the" General Technical Conditions for Children's Furniture "implemented in August 2012.
Â
A staff member of the China Furniture Association said that children have higher environmental protection and safety requirements than adult furniture due to their weak resistance and self-protection ability. Therefore, the new standard focuses on the constraints on the safety and environmental protection of children's furniture. The implementation of this standard will not only regulate the current chaotic children's furniture market, but also enable consumers to purchase children's furniture with reference standards.
Â
Feed Additive refers to a small amount or a small amount of substance added during the production,
processing and use of feed, and the amount used in the feed is small but the effect is remarkable.
Feed Additives are inevitable raw materials used in the modern feed industry.
They have obvious effects on strengthening the nutritional value of basic feeds, improving animal production performance, ensuring animal health, saving feed costs, and improving animal product quality.
Feed Additive
Feed Additives,Choline Chloride For Poultry Feed,Feed Grade Choline Chloride,Choline Chloride 60 Feed Grade
Jinan Huijinchuan Chemical Industry Co., Ltd. , https://www.hjcchemical.com