Common oil smoothing method

Source: Bearing network time: 2013-05-11

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. The oil in the smooth drip oil cup saves the oil to the bearing; the smooth intention is achieved, the mouth can be adjusted according to the amount of oil used, the layout is simple; the application is convenient; it is suitable for the smoothness of low speed and light load bearings.
2. The oil bath is smooth and some bearings are immersed in smooth oil; each turn of the bearing; each roll is immersed in the oil once; together with the oil to other work appearance, suitable for the smoothness of medium and low speed bearings.
3. Smooth splashing uses rotating parts to splash smooth oil; scattered onto the bearing or along the tank wall into the pre-designed oil groove smooth bearing; smooth oil can be recycled in the tank.
4. The pressure supply oil is smooth and the oil pump is used to suck the smooth oil out of the fuel tank; it is introduced into the rolling bearing seat through the oil pipe and the oil hole; and then returned to the oil tank through the oil return hole; after cooling and filtering, it is applied to the support bearing with heavy load and high speed. smooth.
5. The fuel injection is smooth and the oil is sprayed onto the bearing by the nozzle of the bearing inlet; the purpose of reaching the smooth and cooling bearing is suitable for the smoothness of high speed or super high speed bearings.
6. The spray is smooth with boring compressed air, mixed with oil mist generator and smooth oil to form oil mist; sprayed into the bearing through the spray nozzle for smoothing, suitable for high speed, high temperature bearing smooth.

Recommend to friends comments close window

Bearing related knowledge

Support roller for the main roller of sheetfed offset press
Nsk bearing fundamental failure mode analysis of bearing steel demand and fundamental function tumbling imported bearing experience judgment method
Bearings in SKF industrial fans

This article links to http://
Please indicate China Bearing Network http://

Previous:Features and protection instructions for rolling mill bearings Next: Bearing classification features

1X19 Stainless Steel Wire Rope

The steel wire rope plays the role of bearing the load, and its performance is mainly determined by the steel wire. The steel wire is a round (or special-shaped) wire made of stainless steel, carbon steel or alloy steel by cold drawing or cold rolling. It is used to increase the elasticity and toughness of the steel wire rope, lubricate the steel wire, reduce friction and improve the service life. Commonly used rope core organic fibers (such as hemp, cotton), synthetic fibers, asbestos core (high temperature conditions) or soft metals and other materials. Folding type 1. Round strand wire rope 2. Braided wire rope 3. Flat wire rope.

1X19 Stainless Steel Wire Rope

1X19 Wire Rope,1 X 19 Wire Rope,1X19 Stainless Steel Wire Rope,1 X 19 Stainless Steel Wire Rope

Jiangsu Hongze Stainless Steel Wire Rope Co., Ltd , https://www.hzrope.com