2. Mix the SC2000 and the curing agent in a ratio of 100:4. The mixed SC2000 should be used within 2 hours.
3. Apply the mixed SC2000 to the rubber damaged surface with a brush. After the first layer is dried and not sticky (test by hand), apply a second layer.
4. While the second layer is applied on the rubber surface, the CN layer of the repair strip (repair sheet) is also painted.
(The patch and repair strip with CN layer only need to be painted once and mixed SC2000)
5. When the second layer is dry to a slight viscosity, the repair strip (patch) is applied to the repaired surface.
6. Pay attention to the extrusion of air bubbles when pasting the patch. You need to use a compaction roller to roll from the middle to the outside, and then use a rubber hammer to beat and firm.
7. Finally, along the edge of the patch, brush the SC2000 with a brush and cover the edges of the patch and patch.
8. After fully drying, drive after 2 hours.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Baoji zhipu non-ferrous metal processing co., LTD. Main processing single crystal furnace, vacuum furnace, furnace, such as sapphire molybdenum, tungsten, tantalum, niobium tungsten bars, tungsten, Tungsten Plate thermal field, tantalum, tantalum, Tantalum Diaphragm, Tantalum Foil and other accessories processing, domestic use of the best quality raw materials, equipped with advanced equipment and professional production team, can be customized according to the requirements of all kinds of materials of Tungsten Products, welcome to inquire, looking forward to your cooperation!
Tantalum Foil
Tantalum Foil,Tantalum Diaphragm,99.95% High Purity Tantalum Diaphragm ,Good Stability Tantalum Foil
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com