RY, BRY-type high-temperature heat-conducting oil pump Details: Heat-conducting oil pump structure: The pump is a high-temperature pump, the shaft with the liquid back to the pump structure, the pump from the suction chamber, the liquid chamber, the vortex chamber, Liquid separation chamber and other components. Pump bearings using single row radial ball bearings. In some pumps the bottom of the bearing body with cooling chamber. Pump internal high, low pressure zone seal ring. Shaft end with mechanical seal. RY, BRY-type high-temperature heat-conducting oil pump features: The pump uses self-heating cooling structure, changing the traditional water-cooled structure, so that the structure is simple, small size, saving operating costs, good performance, reliable use of our digestion and absorption of foreign oil pump Based on the development of the second generation of products, the basic structure of the single-stage single-suction cantilever foot support structure, the import of the axial suction pump, the export center for the vertical upward, and the same motor mounted on the base. The high-temperature heat-conducting oil pump is supported by a structure of double-ended ball bearing support. The front end is lubricated with grease. The rear end is lubricated with grease. The middle part has a guide pipe for observing the sealing and recovering the heat-conducting oil at any time. RY, BRY-type high-temperature thermal oil pump purposes: The pump is suitable for the following areas 1, the petroleum and chemical industry: polymerization, condensation, distillation, distillation, melting, etc .; 2, oil industry: fatty acid distillation, 3, Synthetic fiber industry: Polymerization of melting, spinning, extending, etc .; 4, Textile printing and dyeing industry: heat setting, drying, hot melt dyeing, etc. 5, plastics and rubber industry: hot pressing, rolling, extrusion, ; 6, the paper industry: dry, corrugated paper processing, etc .; 7, wood industry: plywood, fiber molding, wood drying, etc. 8, the construction industry: asphalt heating; In addition, still in the machinery industry, application.
Silicon Nitride Ceramic Pin
Si3N4 ceramic is an important structural material. It is a kind of super-hard material. It is lubricious and wear-resistant. It does not react with other inorganic acids except hydrofluoric acid. It has strong corrosion resistance and resistance at high temperature. It is also resistant to thermal shock. It is heated to above 1,000 °C in air, and is rapidly cooled and heated rapidly without cracking. It is precisely because of the excellent properties of Si3N4 ceramics that it is often used to make bearings. , mechanical components such as gas turbine blades, mechanical seal rings, permanent molds.
Silicon Nitride Ceramic Pin,Silicon Nitride Ceramic Location Pins,Silicon Nitride Ceramic Welding Pin,Nitride Ceramic Locator Pin
Dongguan Haikun New Material Co., Ltd. , https://www.nitrideceramic.com