According to experts, only solid wood flooring, engineered wood flooring and bamboo flooring with a surface thickness of 4 mm can be refurbished. In addition, partial refurbishment can also create new and old differences between floors, so consumers cannot blindly renovate the floor.
As second-hand housing continues to heat up, second-hand housing renovation has become a hot spot, and renovations such as floor renovation and stone renovation have also ignited. Due to the low cost of floor renovation, many second-hand homeowners plan to renovate the old floor of the home. However, according to experts, only solid wood flooring, engineered wood flooring and bamboo flooring with a surface thickness of 4 mm can be refurbished. In addition, partial refurbishment can also create new and old differences between floors, so consumers cannot blindly renovate the floor.
Floor thickness is required
Floor refurbishment is to restore the old floor by grinding, putty, lacquering and waxing the surface of the floor. Compared with re-purchasing the floor, the old floor adapts to the indoor environment, the stability is better, and the renovation cost is much cheaper.
However, according to experts, not all floors can be refurbished. The surface of the reinforced floor has a layer of wear-resistant aluminum oxide. The refurbishment of the floor will damage the wear layer and cause the aging of the floor to increase, so the reinforced floor cannot be refurbished. Only solid wood floors, parquet and bamboo flooring with a surface thickness of 4 mm can be refurbished. Because the surface of the floor will be polished 1-2 mm after several times of grinding, if the surface of the floor is too thin, the intermediate layer will be polished, thus affecting the service life of the floor.
Pay attention to the quality of supervision
At present, there are very few specialized floor renovation companies, and most of them are cleaning companies. In order to ensure the quality of floor renovation, consumers are advised to ask professional supervisors to supervise the construction.
Floor refurbishment is divided into five steps: sanding, putty, coloring, painting, and waxing. When grinding, the sander should use 40 mesh, 80 mesh and 120 mesh sandpaper in turn (the larger the mesh number, the smaller the sandpaper particles, the less obvious the scratches left by the sanding), and then grind the putty three times, then scrape the putty to level the floor, then The floor is painted or toned. Since the texture of the solid wood surface is natural, it is impossible to change the color of the color, and only the depth of the floor color can be adjusted.
Fertilizer Organic Nitrogen,Agriculture Fertilizer,Slow Realise Fertilizer
Well Chemical Co., Limited , http://www.chemistryr.com