The self-adhesive modified asphalt waterproofing membrane refers to a modified asphalt waterproofing membrane which can be bonded to the base layer or the coil material at normal temperature. According to the tire base, it can be divided into a tire-free and tireless SBS modified asphalt waterproofing membrane.
Fetal free self-adhesive rubber asphalt waterproof material
The tireless self-adhesive rubber asphalt waterproofing membrane is based on asphalt, SBS is a modifier, and is mixed with plasticizer, tackifier and filler material. Polyethylene film, aluminum foil is the upper surface material or no surface covering material. (double-sided cold self-adhesive), the bottom surface or the upper and lower surfaces are covered with a silicon-coated release anti-adhesive material. It has flexibility and ductility, adapts to the ability of the base layer to deform due to stress, and is convenient, safe and environmentally friendly. Applicable to industrial and civil construction underground engineering (basement, subway, tunnel) and pool, water canal and other concealed works waterproof, also suitable for non-exposed building roof waterproofing, more suitable for construction sites are not allowed to use solvents and open flames.
Fetal self-adhesive polymer modified asphalt polyurethane waterproofing membrane
The self-adhesive rubber asphalt waterproofing membrane is made of polymer modified asphalt, and the polyester tire is used as the carcass. The self-adhesive waterproofing membrane with the anti-adhesive material on the back is attached (hereinafter referred to as “self-adhesive polyester tireâ€. Coil"). Polyethylene film surface, fine sand surface self-adhesive polyester tire coil is suitable for external waterproof engineering, aluminum foil surface self-adhesive polyester tire coil can be used for exposed waterproof engineering; 1.5mm self-adhesive polyester tire coil is suitable for auxiliary waterproofing.
Renqiu Huatie Waterproof Engineering Materials Co., Ltd. mainly produces waterproof coatings; waterproofing membrane: chlorinated polyethylene waterproofing membrane, JS-18 flame retardant waterproofing membrane, L-type chlorinated polyethylene waterproofing membrane, N type Chlorinated polyethylene waterproofing membrane, high polymer modified asphalt waterproofing membrane; PVC bridge special drainage pipe, anchor rod, embedded parts, grounding terminal and other products.
Polyurethane Products，PU Products，Products for Polyurethane
Middle Duty Caster Co., Ltd. , http://www.nbcasters.com