The kitchen is the heaviest place in our lives, and it takes time to clean up. But talking about the most difficult place to clean in the kitchen, it may be the range hood, which is also a problem that has been plaguing many housewives. Today, the author gives you a summary of the cleaning method of the hood, hoping to bring some help to everyone.
First, before use, sprinkle a thin layer of soap powder or detergent into the two oil storage tanks, and then inject about one-third of the water, so that the recovered oil floats on the water and falls off. After that, it will be processed as usual. Or you can put a small one-time oil tank in the oil storage box. After collecting the waste oil, take it out and throw it away. In addition to the first time we cleaned the hood, the waste oil filtered out the top layer of grease and used it as a detergent to wipe the body.
(2) How to clean the fuselage of the range hood. Range hood main organic shell, air duct, fan, check valve, oil collection device, lighting device, power switch and power cord. It is important to know which ones can be cleaned and which ones can't be cleaned. First cut off the power of the smoking hood to ensure the most basic life safety. Use a screwdriver to remove the screws on the casing and remove the casing and the oil net. If the oil on the oil net is very thick, use a tool to gently wipe off the excess grease and then mix it with a neutral detergent. In warm water, soak for three minutes and wipe with a clean rag.
(3) How to clean the fan blades of the range hoods In addition to the use of oily fumes, it can also be cleaned with detergent and vinegar mixture. This solution is non-polluting to the human body. Another is the high pressure steam method. The specific method is to put half a pot of cold water in the pressure cooker, heat, and take the lower limit pressure valve when the steam is continuously discharged, open the range hood to align the steam water column with the rotating fan blade, and the oil sewage will flow into the waste oil along the oil drain tank. In the box. The turbine of the hood is treated in the same way.
Roll shutter door Roll Forming Machine
The components of Roll Shutter Door Roll Forming Machine:
Un-coiler;
Hydraulic System;
Computer control cabinet;
Counter;
Simple Stack
Technique parameters of the processing line for the roll shutter door roll forming machine:
Control System: PLC Control Touch Screen
Main Frame: 16mm steel welding
Main Power: 3 KW
Sizes : 2200*700*900mm
Roll Station: 12stands
Shaft Diameter: 40mm
Feeding Thickness: 0.6-1.2mm
Roller : 45# steel
Description of roll shutter door roll forming machine:
1. Appearance and delicate: is made of high qualified steel plate (aluminum) rolling forming, not filled with middle carbon fluorinated compounds of polyurethane foaming materials, heat insulation, sound insulation, heat preservation.
2. Use fast: in the process of start, very swift and no noise, if use motor drive, power changed hands move way can be met.
3.Durable: using high quality materials, sophisticated production technology and production technology, meet slight collision after can sprung automatically deformation.
4. Save a space: the closed beta guide drive, promoting a door with other than to save the building, the internal space, installation is more convenient.
FAQ:
1. Q: Are you a manufacturer?
A:Yes, we are manufacture with roll forming machine factory.
2. Q: How should I do if I would like to order my target machine?
A: Just send us your design drawing if you have. Or tell us your design idea. We arrange our engineer to drawing it for your confirmation.
3. Can you use other brand of spare parts for me if i want?
A: No problem if you want to pay the money.
Roll Shutter Door Roll Forming Machine
Roll Shutter Door Roll Forming Machine,Aluminium Door Roll Forming Machine,Professional Shutter Door Roll Forming Machine,Custom Roll Shutter Door Roll Forming Machine
Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , http://www.zmsteels.com