The impact of winter decoration on wood is mainly reflected in both temperature and humidity. If the temperature is too low or too high, it will cause adverse reactions to the wood, curling or even cracking. The main material should be prepared in advance, preferably in the room with heating equipment for 3 to 5 days, so that the moisture content of wood close to the level of the house to avoid deformation in the future.
Prevent dry and dampness on both sides
The impact of winter decoration on wood is mainly reflected in both temperature and humidity. If the temperature is too low or too high, it will cause adverse reactions to the wood, curling or even cracking. The main material should be prepared in advance, preferably in the room with heating equipment for 3 to 5 days, so that the moisture content of wood close to the level of the house to avoid deformation in the future. In addition, after wood is transported into the decoration site, it should be avoided to put it in a ventilated place, otherwise its internal moisture will be quickly lost due to air drying. When the humidity is low, it is necessary to reduce the ventilation, and put a pot of water near the heating facilities to promote evaporation, so that the wood can safely survive the winter.
Wood products sealed in time
In winter, the wood is easily brittle and may not be visible at the beginning of cracking. However, if the painter does not seal the oil in time, it can easily cause cracking of the veneer surface. For the wood line used as the edge, the moisture content is higher than that of the veneer. After the processing is completed, the surface should be sealed with oil as soon as possible, otherwise shrinkage will occur and the appearance of the veneer will be affected.
Do not forget the expansion joints on the wooden floor
In the winter when the air is dry, when workers lay wooden floors, an expansion joint of about 2 mm is indispensable, otherwise drums and dangling will easily occur in the future. If you encounter water leakage, water on the wooden floor, etc., you must dry it in time, not let it directly in the sun exposure or use electric oven baking. In order to prevent deformation, the floor on both sides of the wall can be dismantled, and the moisture can be dispersed before reinstalling.
Bay window decoration entrance decoration house decoration house interior decoration space TV decoration decoration style fashion small apartment decoration home
Truss Head Self Driling Screw,Truss Washer Head Self Drilling Screw,Truss Head Self Drilling Screws,Truss Head Self Tapping Screws
Hebei Kangjin Metal Products CO.,Ltd , https://www.kjmetalproducts.com