Myth 1. Do not pay attention to maintenance water:
Radiator in the maintenance process, many families in the maintenance of water on the radiator is very casual, and even think that the radiator maintenance water, casual water will do, this is wrong, centralized heating radiator maintenance water, must be the heating water flow rate Fast water because this water has less impurities. Independent heating radiator maintenance water, because independent heating conditions allow, so it is best to radiator maintenance water, processed into soft water quality maintenance radiator.
Myth 2. Aluminium radiator maintenance water does not use PH test paper test:
Aluminium radiators are now widely used and are now being independently heated in homes. However, while the aluminum radiators are highly resistant to oxidation, they are subject to alkali corrosion and chloride ion corrosion. Therefore, to avoid aluminum radiator and alkaline (PH value higher than 7) or chlorine content of high contact, so as to avoid the occurrence of corrosion leakage. Therefore, for aluminum radiator maintenance, test strips must be used to detect the pH value.
Misunderstanding 3. Copper-aluminum composite radiator does not meet maintenance:
Copper-aluminum composite radiators are used by many users. When the copper-aluminum composite radiators are maintained, they feel that the internal copper water passages are highly resistant to corrosion. Therefore, it is not possible to maintain the copper-aluminum composite radiators. This is wrong. Practice, because the copper-aluminum composite radiator full of water maintenance, not only is the maintenance of the internal water pipeline, but also the composite copper and aluminum radiator maintenance.
Myth 4. Wrap up unused radiators:
This view is wrong. After the radiator is wrapped up, a dead corner is easily formed in its cover, breeding bacteria pests and easily accumulating dust. When it is heated again, the dust and bacteria will fly through the house due to the convection of air. The environment in the house is not good and the bacteria will be inhaled into the body, which will cause harm to human health.
Myth 5. Weld-free products are not afraid of corrosion:
This view is wrong. Many steel radiator manufacturers advertise that there are no welding seams, the inner wall is lubricated, and they are not afraid of corrosion. In fact, no welds, inner wall lubrication does not mean that the radiator can be preserved. Because the corrosion of steel radiator does not occur in the weld.
This article is edited: Gold Heatsink
Apart from the classical Residential House, we feel there are big demands for Tiny House (11M2-50 M2). Those tiny prefab houses, Compact Houses can be used as back yard studio, storage, living, garden office, Garden Studio, vocational house, cabin, etc. The structure & insulation of those houses are made by Structural Insulated Panels (SIPs) or light gauge steel frame. Decoration accessories are optional items. The houses arepanelized, very easy to be installed (DIY),strong,green,quiet,and cozy. The following are some ready to go house plan. We also welcome customized plan.
Tiny House
Tiny House,Compact Houses, Small House, Tiny Prefab House, Tiny House Manufacture
Dalian Quacent New Building Materials Co.,Ltd. , https://www.quacenthomes.com