The multi-tooth indexing table is a commonly used angle measuring instrument, which has the characteristics of small indexing error, convenient use and high reliability. The general multi-tooth indexing table can only be used in the vertical axis state, but many objects to be tested require multi-tooth indexing table to work in the horizontal axis state, and the multi-tooth indexing table is required to have a small volume and weight to avoid being The horizontal axis of the measuring device causes a large additional load, causing bending deformation of the horizontal axis and increasing measurement error. Generally, the reason why the multi-tooth indexing table cannot be used in the horizontal axis state is that the method of increasing the shafting clearance is used to compensate for the interference caused by the center of the shaft center and the center of the toothed disc. When the horizontal shaft is used, the shaft is tilted due to the weight of the movable toothed disc, so that the toothed disc pair cannot be reliably engaged. Therefore, there are two ways to solve the problem of horizontal shaft work: one is to use a bearing with an interference, the shaft
Corner Bathtub
Corner Bathtub
Guangzhou Aijingsi Sanitary Products Co.,Ltd , https://www.hottubdesign.com